Down The Hole, DTH Drill Rock Button Bit for Quarry Drilling,
Mining, DTH Hammer Drilling
ROSCHEN DTH hammer and bits are compatible with CIR, DHD, QL, SD,
Mission, etc. Series of Atlas and Secoroc etc.
They are with high efficiency, low failure rate and long service
life. Even for all kinds of high hardness, high abrasive rocks and
other harsh conditions, our drilling tools can also realize
efficient and economical drilling.
Down-the-hole (DTH) bits are used with Down-the-hole hammers for
drilling holes through a wide range of rocks types. In conjunction
with DTH hammers, drill hammer bits are designed with a splined
drive for rotating the bit in the ground. Drill bits are available
in different sizes and different styles so they can drill a wide
range of hole sizes.
| Basic Information |
| Model NO.: | RS 105 |
| Material: | Cobalt Steel Alloys |
| Item: | RS 335 |
| Hammer Length(mm): | 143 |
| Weight(Kg): | 33 |
| Air Consumption (M3/Min.): | 4.2-11.7 |
| Impact Frequency (Times/Min.): | ≥800 |
| Trademark: | ROSCHEN |
| Origin: | GERMANY, CHINA |
| Type: | Center Drill Bit |
| Usage: | Well Drilling |
| Drilling Dia. (mm): | 90-105 |
| Outside Dia.(mm): | 85 |
| Working Pressure (MPa): | 0.7-2.1 |
| Torque(N.M): | 475 |
| Connection 1: | API 2-3/8 |
| Specification: | SGS |
| Item | ROS 335 | ROS 345 | ROS 355 | ROS 365 | ROS 385 | ROS 3105 | ROS 3125 |
| Drilling Dia. | 90-105 | 110-130 | 135-155 | 160-200 | 200-254 | 254-311 | 311-360 |
| (mm) |
| Hammer Length(mm) | 143 | 1281 | 1292 | 1345 | 1578 | 1440 | 1430 |
| Outside Dia.(mm) | 85 | 105 | 124 | 154 | 190 | 250 | 270 |
| Center Hole Dia. (mm) | 33 | 36 | 36 | 61 | 61 | 75 | 85 |
| Working Pressure(Mpa) | 0.7-2.1 | 0.7-2.1 | 0.8-2.1 | 0.8-2.1 | 0.8-2.1 | 0.8-2.4 | 0.8-2.4 |
| Air Consumption (M3Min.) | 4.2~11.7 | 5.7~14.2 | 6.5~19.3 | 9~18 | 12~30.8 | 15~34 | 20~37.8 |
| Torque(N.M) | 475 | 600 | 791 | 950 | 1040 | 1260 | 1250 |
| Impact Frequency | >=800 | >=800 | 800-1200 | 600-1100 | 660-1208 | 660-1230 | 600-1150 |
| (TimesMin.) |
| Connection 1 | API 2-38 | API 2-78 | T 91-3 | API 4-12 | API 4-12 | API 4-12 | API 4-12 |
| ROSCHEN DTH Hammers Specifications |
| Hammer Size | Bit Shank | ROSCHEN Code | Connection Thread | Suitable bit | Working pressure | Air consumption |
|
| 2" | BR2 | ROS 11 ROS 22 | RD50 box | ￠70-￠90mm | 0.7-1.75Mpa | 0.7Mpa | 4.5m3/min |
| 1.0Mpa | 4m3/min |
| 1.4Mpa | 5m3/min |
| 3" | DHD3.5 | ROS 32 | API 2 3/8" Reg | ￠90-￠110mm | 1.0-1.5Mpa | 1.0Mpa | 4.5m3/min |
| COP32/COP34 |
| M30 | 1.5Mpa | 9m3/min |
| 4" | DHD340 | ROS 34 | API 2 3/8" Reg | ￠110-￠135mm | 1.0-2.5Mpa | 1.0Mpa | 6m3/min |
| COP44 |
| QL40 |
| SD4 | 1.8Mpa | 10m3/min |
| M40 | 2.4Mpa | 15m3/min |
| 5" | DHD350 | ROS 52 ROS 54 | API 2 3/8"Reg/API 3 1/2" Reg | ￠135-￠155mm | 1.0-2.5Mpa | 1.0Mpa | 9m3/min |
| COP54 |
| QL50 |
| SD5 | 1.8Mpa | 15m3/min |
| M50 | 2.4Mpa | 23m3/min |
| 6" | DHD360 | ROS 62 ROS 64 | API 3 1/2" Reg | ￠155-￠190mm | 1.0-2.5Mpa | 1.0Mpa | 10m3/min |
| COP64 |
| QL60 |
| SD6 | 1.8Mpa | 20m3/min |
| M60 | 2.4Mpa | 28.5m3/min |
| 8" | DHD380 | ROS 82 ROS 84 | API 4 1/2" Reg | ￠195-￠254mm | 1.0-2.5Mpa | 1.0Mpa | 15m3/min |
| COP84 |
| QL80 | 1.8Mpa | 26m3/min |
| SD8 | 2.4Mpa | 34m3/min |
| M80/M85 |
| 10" | SD10 | ROS 100 | API 6 5/8" Reg | ￠254-￠311mm | 1.0-2.5Mpa | 1.0Mpa | 22m3/min |
| Numa100 | 1.8Mpa | 40m3/min |
| ROS 100 | 2.4Mpa | 55m3/min |
| 12" | DHD1120 | ROS 120 | API 6 5/8" Reg | ￠305-￠445mm | 1.0-2.5Mpa | 1.0Mpa | 30m3/min |
| SD12 | 1.8Mpa | 56m3/min |
| Numa120 | 2.4Mpa | 78m3/min |
| Notes: Any special size of DTH bits will be available by requests. |
| Metzke, Remet thread is available! |
| ROSCHEN DTH Bits Specifications |
| Hammer Size | Bits diameter | Shank | ROSCHEN CODE |
| Metric | Inch |
| 1" | 64mm-70mm | 2 1/2"-2 3/4" | BR1 | ROS 11 |
| 2" | 70mm-95mm | 2 3/4"-3 3/4" | MACH20/BR2 | ROS 22 |
| 3" | 90mm-102mm | 3 1/2"-4" | COP32/COP34/MACH303 | ROS 32 |
| M30/DHD3.5/BR3 | ROS 34 |
| 4" | 105mm-152mm | 4 1/8"-6" | COP44/DHD340/MACH44 | ROS 42 |
| SD4/M40/QL40 | ROS 44 |
| 5" | 133mm-165mm | 5 1/4"-6 1/2" | COP54/DHD350R/MACH50 | ROS 52 |
| SD5/M50/QL50/BR5 | ROS 54 |
| 6" | 152mm-254mm | 4 1/8"-10" | COP64/DHD360/SD6 | ROS 62 |
| M60/QL60/Bulroc BR6 | ROS 64 |
| 8" | 203mm-330mm | 8"-13" | COP84/DHD380/SD8 | ROS 82 |
| QL80/M80/M85 | ROS 84 |
| 10" | 254mm-380mm | 10"-15" | SD10 | ROS 100 |
| NUMA100 |
| 12" | 305mm-508mm | 12"-20" | DHD1120/SD12 | ROS 120 |
| NUMA120/NUMA125 |
| Notes: Any special size of DTH bits will be available by requests. |
| Metzke, Remet thread is available! |
Bit face shape selection:
1. Drop Center Bit
For high penetration rates in soft to medium hard and fissured rock
formations. Low to medium air pressures. Maximum hole deviation
control.
2. Concave Face
The all-round application bit face specifically for medium hard and
homogenerous rock formations. Good hole deviation control and good
flushing capacity.
3. Flat Face Bit
This kind of face shape is suitable for hard to very hard and
abrasive rock formations in applications with high air pressures.
Good penetration rates an resistance to steel wash.
4. Double Gauge Face
This kind of face shape is suitable for fast penetration rates in
medium to hard rock formations. Designed for high air pressures and
good resistance to steel wash step gauge bit.
5. Convex Face
For high penetration rates in soft to medium-hard with low to
medium air pressures. It is the most resistance to steel wash, and
may reduce the load and wear on the gauge buttons, but poor hole
deviation control.
FAQ
The information about dth drill bit you may like to know before
order:
1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight
2. Handling time for an order
Based on order quantity, normally it takes 20 days for production.
in 3 working days after receiving the advance payment
3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or
by air
Bulk order: we suggest by air or by sea.
4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before
shipping out.
5. After Services:
a. Our sales team will response for your question within 24 hours
(Holidays Excluded)
b. Technical Support will be available in any time
6. Quality & Service:
A. There will be strict inspection and testing for every order
before shipping out.
B. Our sales team and Technical Support will response for your
question within 24 hours through skype: ROSCHEN.TOOL and
WhatsApp/Wechat: +86-13764195009
C. Free replacement will provide once the failure confirmed caused
or our product quality.
For more information, please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
