Pneumatic Glass Laminating Autoclave Glass Reactor With TPC Control
System Of GB150 Standards
Composite autoclave (series of SN-CGF)
In the last ten years, we have seen the evolution of new materials,
with excellent mechnical and physical features. The mechanical
resistance, together with the lightness of composite materials, are
finding more and more applications. We call composite material the
product obtained from the polymerization of carbon fibers and
resins, adequately prepared and shaped overlapping coats of fibers
abd resin on moulds or cores.
The autoclave is a key equipment for hot -pressing shaping of
carbon fibres and resin matrix
composites(polyimide,Bismaleimide,epoxy resin and thermoplastic
resin metrices,etc.). In fact, the quality of the product is
obtained inside the autoclave reaching an increase of mechanical
features up to 20-30% compared to other methods of polymerisation,
which do not foresee the outside pressurisation of the product.
The reliability and the precision of the cycles which can be
obtained with Olymspan autoclave,allow to reach and keep high
quality standards of the product ,which is widely used in the
high-tech fields such as aerospace,
automotive,electronics,weapon,traffic,sports equipment and new type
of energy,etc.
Technical specification
| Item | design parameter |
| working diameter | 600~6000mm |
| working length | 1000~30000mm |
| working temperature | 100~400 degrees celsius |
| working pressure | 0.6~5Mpa |
| temeprature unformity | ±1.0~±3.0 degrees celsius |
| temperature accuracy | ±1.0 degrees celsius |
| pressure accuracy | ±0.005Mpa |
| vacuum pressure | ≤-0.098Mpa |
| |
Features:
Advanced Thermal Process Control System (TPC) based on PC
platform,with a reliable and powerful performance;
Unique heating system on the bottom and cooling system, to save the
running cost;
The design of screen type air duct can balance and force the
convection airflow to get a perfect temperature uniformity in the
autoclave;
Fully sealed direct connect special motor, to prevent air and oil
leakage;
Parts and materials of high qualityl
Various of manufacturing standard.GB150/ASME/PED/AD;
Customize specification;
