PE PP Cosmetic Small Plastic Bottle Production Machine / Molding
Machine SRB70D-2, Small Cosmetic Bottles HDPE Blow Moulding
Machine, Shampoo Bottle HDPE Blowing Machine
QUICK VIEWS
1. SRB70D-2 is double station double head hdpe bottle blow molding
machine for 500ml to 1500ml generally.
2. Its output for 1000ml cosmetic bottle is 650Pcs/hour, output for
1L small square container is 600 Pcs/hour.
3. On-line auto-deflashing mould is supported to achive scraps
automatic removing. Bottles come out through product collectie
guidance shelves, the scraps comes out along sliding channels to
machine front.
|
TECHNICAL PARAMETERS
| Machine Model | Double Station Extruder Blowing Machine |
| Max Product Volume | 2 L |
| Machine Weight | 5.5 Tons |
| Machine Size | 3.8 x 2.2 x 2.5 m |
| Screw Diameter | 70 mm |
| Plasticizing Capacity | 90 KG |
| Clamping Force | 68 KN |
| Platen Size | 320 x 390 mm |
| Platen Opening Stroke | 150~500 mm |
| Max Mould Size | 360 x 360 mm |
| Double Head Central Distance | 160 mm |
| Max Product Diameter or Width | 135 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 100 mm |
| Total Power | 48.5 KW |
| Average Energy Consumption | 31.5 KW |
Click picture above to see video for making 750ml cosmetic bottle
PRODUCTION ARRANGEMENT
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 1.0m3/min, 0.6Mpa
5. Water Supply Requirement: 8 Tons
6. Machine Power Consumption: 32.5 KW
7. Production Line Power Consumption: 45 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 2 Workers
|
PRODUCTION FLOW
The working flow of 5L double station plastic container
manufacturing machine production flow is basically like this. The
PLC in the electronic control case sends the instruction, the
hydraulic system receives the instruction, the fuel tank and the
motor start to operate, drives the screw to run, and extrudes the
embryo through the die head. The opening and closing mold begins to
be closed, the needle is blown, cooled, and plastic products are
formed.
MACHINE FEATURES
1. Control Unit: WISETECH total machine programmable controller
controller and ture colorful touch panel. English parameter process
setting, state monitoring and products counting are convenient and
intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand
hydraulic valve and seal, proportional control. And has features of
high stationarity and reliability, accurate operation, long
longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous Delta
inverter adopts Italian technology; Screw speed regulation adopts
variable-frequency speed regulation control system. It has the
features of stable rotate speed, powerful power, energy-saving and
so on. Mixing screw has wide applicability to raw materials and the
plasticization quality is even better. Energy-saving machine barrel
and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in
accumulator head, is smooth and dependable. This die head adopts
German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and
balanced.
6. Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick,
stable.
8. Electrical Components: All of the electrical components are made
in Japan and Taiwan.
