Data Center Singlemode Fiber Optic Jumper LC To ST Fiber Patch Cable Low Insertion Loss

FAPC-LPTPS2 , LC To ST Singlemode Fiber Optic Jumper For Data Center With Low Insertion Loss

Fire Test And Fire Performance Of Fiber Optic Jumper And Pigtail

As we know, OFNR or OFNP is flame etardant mark for fiber optic jumper, they are with better fire performance than PVC and LSZH.

In the United States, Canada, Mexico and other North American countries, fire rating for copper cable is divided into four grades, CMX, CM, CMR, CMP and the fire rating of fiber cable is divided into three grades, OFN, OFNR, OFNP . These are specified in the UL standard, the CMR (OFNR) level is allowed to be used in the vertical trunk cable, CMP (OFNP) level is allowed to be direct laying in the ventilation pipe, and do not need to put into wire casing. CM (OFN) and CMX can be used for general cabling environments.

The international Europe standard defined low smoke halogen LSZH cable, the key point is the cable sheath material does not contain halogen, the smoke is low and with low toxicity when it is burning and the sight is not affected so people has a short time to escape. There are two standards, one is IEC332-1, flammability is quite similar to the North American CMX level cable, and the other is IEC332-2, flammability is equivalent to CM (OFN) level.

Low smoke halogen free substrates are polyolefins, which have a high fuel content, so they have to be mixed with metal hydrate fillers to inhibit their flammability, but when the water of hydration is exhausted, combustion may happen.

Under the same condition, fire spread speed is the same for bare CMX and LSZH cable, but there is no open fire for CMP (OFNP). CMX/T combustion test is to burn the CMX level cable which already put into metal pipe , the flame resistance is better than exposed cable . So put the cable into metal pipe during cabling is a good solution to higher the flameproof ability.

Main Features Of FAPC-LPTPS2

100% tested before shipping ( including end checking, Insertion Loss, customer specified length and Return Loss)
Default colour is Yellow , other customized colours are available upon request
outer jacket material is PVC or Low Smoke Zero Halogen (LSZH)
PC, UPC, APC polishing type are available
High concentricity 2.5mm ceramic ferrule for ST and 1.25mm ceramic ferrule for LC

Available fiber type G652B, G652D or G657A

With End A and end B markings

Product Specifications

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.