SFP LC Media Converter , Network Media Converter For 1.25G SFP Optical Transceiver

FAMC-SFPQ2, Gigabit SFP Fiber Media Converter Suitable For 1.25G SFP Optical Transceiver

Manageability of fiber media converter is mainly reflected in two aspects, through long-term practice and large-scale applications, optical fiber media converter functions as a transmission unit in network, the main task of management is fault monitoring, in response to this task, optical fiber media converter use link fault alarm and twisted pair link alarm, and independent network management based on SNMP to assist the management personnel.

optical link fault alarm is a optional configuration of fiber media converter, when starting the optical link alarm function, if the fiber path fails, the media converter will automatically block the connecting of electrical port, resulting link down with the uplink network equipment , so that can get the transmission fault instructions from the network management platform of switch.

2, twisted pair link fault alarm is also an optional configuration. When twisted pair link alarm function is started, if there is failure on network, the fiber media converter will automatically block the connecting of optical port, lead to link down with the uplink network equipment, so that indication of failure can be gotten from the management platform of switch, and it also can prolong the life of optical modules.

3, independent network management system of fiber media converter is based on the standard SNMP network management protocol, it provides graphical management and monitoring functions for all fiber media converters. It is composed of system management graphical interface, management module and interface module. Each agent can manage up to more than 2000 pieces 16 slot media converter chassis.

Main Parameters

Product Characteristics Of FAMC-SFPQ2

1, Supported ports: optical fiber port LC or SC; RJ45 for twisted pair;

2, Auto-negotiation rate and full/half-duplex transfer mode are supported at twisted pair port;

3, Support auto adaptation MDI/MDIX without cable selection;

4, Conflicting frames detection in half-duplex and flow control in full duplex;

5, LEDs for status indication of optical power port and UTP port;

6, Up to 1024 MAC address storage;

7, External power converter;

8, Optical characteristic depends on the SFP module.

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.