FAPC-LPLPS1 , Single Mode Simplex Fiber Optic Patch Cable With
2.0mm LC Optical Connector
Aramid Or Kevlar Strengthen Member Of Fiber Optic Jumper And Fiber
Cable
Aramid (Kevlar) is a new type of high-tech synthetic fiber, it is
with ultra high strength, high modulus, high temperature
resistance, acid resistance, alkali resistance and light weight,
its strength is 5 ~ 6 times of steel wire, modulus is 2 ~ 3 times
pf steel wire or glass fiber , toughness is 2 times of steel wire,
but the weight only about 1/5 of steel wire , it does not decompose
or melt at 560 ℃ temperature. It is with good insulation and
anti-aging performance so its use life is long.
Aramid (Kevlar) is with good mechanical properties, it is a kind of
flexible polymer, the breaking strength is higher than common
polyester, cotton, nylon and so on. It has the advantages of large
elongation, soft handle and good spinnability.
Excellent flame retardancy and heat resistance, the limiting oxygen
index (LOI) of the aramid fiber is greater than 28, so it does not
burn when it leaves the flame. The flame retardancy of the meta
aramid fiber is determined by its chemical structure, so it is a
kind of permanent flame retardant fiber. The aramid fiber has good
thermal stability and can be used continuously under the condition
of 205℃, and the high strength can be maintained at temperature
higher than 205℃. The aramid fiber has higher decomposition
temperature, and does not melt under high temperature condition.
When the temperature is higher than 370 ℃, it begins to
carbonization.
Stable chemical properties, aramid has excellent resistance to most
chemicals, it can resistant most high concentrations inorganic
acid, and its alkaline resistance also excellent at room
temperature.
Radiation resistance, the radiation resistance of aramid fiber is
excellent. For example, under the condition of 1.2 x 10-2 w/in2
ultraviolet radiation and a long time irradiation of 1.72 x 108rads
ray, the intensity is still the same.
Durability, aramid fiber is with excellent corrosion resistance and
chemical resistance.
Fiberall use high quality Aramid (Kevlar) only and do not use
inferior substitute in our fiber optic jumper so that the tensile,
crush resistance and bending radius is guaranteed.
Application
Cable Television CATV
Active device termination
Telecommunication networks
Metro network
Local Area Networks (LANs)
Wide Area Networks (WANs)
Data processing networks
Test equipment
Precise installations
Parameters Of FAPC-LPLPS1
| Fiber Type | Single mode |
| Cable Type | Simplex |
| Connector Style | LC |
| Ferrule Interface Type | PC, UPC, APC |
| Cable Diameter | 2.0mm |
| Lengths | Default or customized length |
| Strength Member | Aramid Yarn |
| Outer Jacket | PVC or LSOH |
| Length Tolerance (<15 meters ) | -0/+100mm |
| Length Tolerance (>15 meters ) | -0/+10% |
| Jacket Color | Yellow ( SM ) |
| Durability | 500 cycles(0.2 dB max increase),
1000 mate/demate cycles |
| Operating Temp. | -20 °C to +70°C |
| Storage Temp. | -40 °C to +85°C |
| Ferrule Concentricity | < 1μm, Other Ferrule Concentricity < 1μm |
| Relative Humidity | 90-95% at 40°C |
