FA-TC90US35-20&FA-TC90US53-20 , TTL 1x9 DIP 84M BiDi Single
Fiber Optical Transceiver SM SC 1310nm/1550nm
There are various fiber optic transceiver in the market, how to
distinguish and select? Fiberall will share with you via
classification.
By speed rate (Fiberall): In order meet different requirements of
transmission speed, different data rates were developed. Like low
bit rate, FE, GE, 10GE, 40GE, specifically, like 155Mb/s, 622Mb/s,
1.25Gbps, 2.5Gbps, 4.25Gb/s,6Gb/s,8Gb/s,10Gbps, 40Gbps and so on;
By package (encapsulation, Fiberall):1X9, GBIC (Gigabit Interface
Converter),SFP (Small Form-factor Pluggable Mini Type GBIC,
including SFP+), SFF (Small Form Factor, with pin, non hot
pluggable), XFP (10 Gigabit Small Form Factor Pluggable), Xenpak
(10G, XAUI, 70PIN,Support 10.3 Gb/s,9.95 Gb/s or 4×3.125 Gb/s), X2
(10G, evolved from Xenpak), QSFP(Quad Small Form-factor Pluggable,
40G), CFP (Centum Form-factor Pluggable, 100G),200/300pin, XPAK
(old type, Mini Xenpak, 4 Channels, with clock signal);
By fiber type: Single mode or multimode; By function: Receiver,
transmitter, Transceiver (receiver & transmitter) and Transponder
(appointed signal); By interface: LC simplex, LC duplex, SC
simplex,SC duplex, FC simplex and so on; By transmitting distance:
300Meters, 500meters, 2KM, 20KM, 40KM, 60KM, 80KM, 100Km and so on;
By Pluggable: Support Hot Pluggable and Non Hot Pluggable.
By wavelength: Including 850nm for MM, 1310nm for both SM and MM,
1490nm for SM, 1550nm for SM and 1470nm, 1490nm, 1510nm, 1550nm,
1570nm, 1590nm and 1610nm for CWDM and so on.
By application (Fiberall):SDH (speed rate, STM-1, STM-4, STM-16,
STM-64, STM-256); Fiber channel/storage network: 1G, 2G, 4G, 8G and
so on; Ethernet: 100 BASE FAST ETHERNET, 1000 BASE GIGABIT ETHENET,
10 GIBABIT ETHERNET; Video: for PDH multiplexer or HD video
transmission;
By compatibility (Fiberall):Universal standard optical transceiver
and compatible fiber optic transceiver , standard type is complaint
with related standard and protocols, compatible type can work with
appointed brand with manufacturer’s protocol.
Main Characteristics Of FA-TC90US35-20 & FA-TC90US53-20
1, Single Fiber Bi-Directional Transceiver;
2, Working wavelength: 1310nm and 1550nm;
3, Transmitter section use 1310nm /1550nm FP/ DFB Laser;
4, Single Power Supply +3.3V /+5V ;
5, Single fiber package with optional SC, FC or ST interface;
6, Standard TTL data output with signal detect indication,
compatible with CMOS level;
7, Standard 1×9 package;
8, Applied to optical fiber access network and PDH systems with bit
rate up to 84Mbps.
Transceiver Specifications
| Parameter | Condition | Min. | Typical | Max. |
| Wavelength(nm) | 1310 | 1270 | 1310 | 1350 |
| 1550 | 1520 | 1550 | 1570 |
| Power Supply(V) | Vcc | 3.135 | 3.3 | 3.465 |
| 4.75 | 5 | 5.25 |
| Signal Level | TTL | | 0~4 | |
| LVTTL | | 0~3 | |
| Output Spectral Width(nm) | FP-LD,RMS | | | 4 |
| DFB-LD,-20dB | | | 1 |
| Extinction Ratio (dB) | EX | 10 | | |
| Optical Isolation (dB) | | | 38 | |
| Sensitivity (dBm) | 62.5Mb/s | | | －35 |
| Overload (dBm) | BER=1×10－10 | -3 | | |
| Current of transmitter section (mA) | Vcc=5V | | | 65 |
| Vcc=3.3V | 65 |
| Current of receiver section (mA) | Vcc=5V | | | 50 |
| Vcc=3.3V | 50 |
Rate, Power, Sensitivity and Transmitting Distance
| Rate | Laser(LD)& Wavelength(nm) | Output Power (Average) P0(dBm) | Sensitivity(dBm) | Distance |
| 84Mbps | FP 1310 | －12 | ≤-35 | 20km |
| 84Mbps | FP 1550 | －12 |
| 84Mbps | FP 1310 | －10 | ≤-35 | 40km |
| 84Mbps | FP 1550 | －10 |
| 84Mbps | FP 1310 | －6 | ≤-35 | 60km |
| 84Mbps | FP 1550 | －10 |
| 84Mbps | DFP 1490 | －8 | ≤-35 | 80km |
| 84Mbps | DFP 1550 | －8 |
| 84Mbps | DFP 1490 | －5 | ≤-35 | 100km |
| 84Mbps | DFP 1550 | －5 |
| 84Mbps | DFP 1490 | －0 | ≤-35 | 120km |
| 84Mbps | DFP 1550 | －0 |
