Grinding Roller Carbide Pin as a Wear Part Use for HPGR with high
working efficiency
Desciption of tungsten carbide studs
Various size for grinding roller carbide pin have been on to the
High pressing
Grinding roller, it's attachment on the high pressing machine
It can help the surface to use longer time. This is the abrasive
wear resisatant stud for the grinding roller.
| Grades | Density(g/cm3) | Hardness(HRA) |
T.R.S N/MM2
|
| RX20 | 13.5 | 85.5 |
3200
|
other grades may be offered by customers'requirement
|
| Specification | H | D | Accuracy | Ra(surface finish |
| Z1160200 | 20±0.3 | 16±0.01 | H7 | 0.2 |
| Z1200250 | 25±0.3 | 20±0.01 | H7 | 0.2 |
| Z1220300 | 30±0.3 | 22±0.01 | H7 | 0.2 |
| Z1220350 | 35±0.3 | 22±0.01 | H7 | 0.2 |
| Z1220400 | 40±0.3 | 22±0.01 | H7 | 0.2 |
Remark:
1. dimension refers to sketh
2. customize for client's requirement is available
3. fully angular differs from different models
Usage of tungsten carbide studs
Packing&Delivery of tungsten carbide studs
Firstly use inner boxes, then put into outer carton or do as
customer requested.
[Shipping Methods]
Shipment methods: By air or sea, DHL, UPS, FEDEX, TNT or as your
resquest.
company information
1 zhuzhou Mingri Tungsten Carbide Co., Ltd. was established in May
of 2001 with the investment of RMB 40 million. We have up-to-date
production machine line and a lot of technicians.
2 Zhuzhou MingRi Cemented carbide co.,ltd is located in the
tungsten carbide hometown , convenient transportation, from
changsha airport just 40 minutes, wuhan just 1.5 hour, from
guangzhou just 2 hours.
3 A favorable peripheral environment for cemented carbide
manufacturing provides a natural barrier. Convenient traffic for
tomorrow's internationalization laid a wide road.
