Round Or Hex 3/8" Carbon Steel Swage Standoff Spacer Mounting
Electronic Circuit Boards
Quick Detail:
Swage Standoffs & Swage Spacers 1/8" thru 3/8", 3mm thru 10mm-
Lengths: 1/32" thru 1", .5mm up to 51mm- Shank Lengths: .062 thru
.295.
Polestar swages round- hex, 28 finishes, available in brass,
aluminum, stainless steel, carbon steel. An inexpensive method of
spacing or mounting electronic circuit boards and electronic
components.
Description:
Much like their counterpart, swage spacer, the swage standoff is
also used to create distance between object. Typically this style
of parts are predominately used in curcuit board applications.
Where the swage portion of the part is inserted (swaged) into
previously mentioned board and another board is spaced properly.
The female end of the swage standoff accepts a thread male part,
most times a screw but could also be Male-Female Standoff. These
parts are excellent to use when circuit boards are stacked one on
top of another. Below is a list of standard swage standoffs parts
we supply.
DIAMETER: 1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8"
SHAPE: Round and Hex
MATERIAL: Brass, Aluminum, Stainless Steel, Carbon Steel
BODY LENGTH: Wide variety of lengths- 1/32" (.031) increments up to 1"
SHANK LENGTH: Wide variety of lengths ranging from .062 through .295
FINISH: Available in 28 finishes
THREAD: 0-80 through 10-32 / Internal Thread- Class UNC 2B
INSIDE HOLE DIAMETER: Ranging from .063 through .194 for screw sizes
0-80 through 10-32
TOLERANCE: Body Length: ± .005 / Shank Length: ± .003 Inside Hole Diameter: + .000 - .003
Diameter: Standard commercial bar stock tolerances
We offer your firm engineering and design services for customized
or modified parts, at no additional charge- please contact our
Engineering Department.
Swage Standoffs & Swage Spacers 1/8" thru 3/8", 3mm thru 10mm-
Lengths: 1/32" thru 1", .5mm up to 51mm- Shank Lengths: .062 thru
.295.
Polestar swages round- hex, 28 finishes, available in brass,
aluminum, stainless steel, carbon steel. An inexpensive method of
spacing or mounting electronic circuit boards and electronic
components.
After installation they are permanently affixed to the board and
further assembly becomes simplified. Installation is accomplished
by using any means of force. Normal equipment, such as an arbor
press, punch press, are most commonly used. If swaging is planned,
the hole must be countersunk. For rivet type installation, an
ordinary drilled or punched hole, of the correct diameter, is
adequate. Available in both threaded and unthreaded / clear hole
types.
Spacers and Standoffs are two common types of positioning
electronic hardware. They provide sturdy support, alignment and
spacing to a variety of applications such as circuit board
assemblies, panels and doors. Spacers and Standoffs are available
in a variety of shapes, sizes and materials to meet the particular
needs of your application. Round, hex, square, swage, female
threads, male threads and even knurling for insert-like properties
are all available. Non-magnetic and electrically neutral materials
also help facilitate sensitive assembly requirements.
A Standoff is a fastener that is used to create space between two
objects, often to properly position them. In the world of
electronic compenents and electronic hardware, standoffs are
typically used to space circuit boards, panels, doors or gears.
Standoffs can be round, hexagonal or square in shape. They can have
exterior knurling as well as swage characteristics. Female-Female
or Double Female Standoffs can be fully threaded or partially
threaded on each end. Male-Female Standoffs are also available.
Standoffs are available in a variety of materials including
aluminum, brass, plastic, steel and stainless steel.
Specifications:
A swage spacer is simply defined as an object that is used to
create space between two object, often to properly position them.
The style of parts are predominately used in curcuit board
applications. Where the swage portion of the part is inserted
(swaged) into previously mentioned board and another board is
spaced properly. In the world of electronic compenents we typically
see spacers used in a variety of situations. For instance one could
space circuit boards, panels, doors or gears
Round or Hex
2-56 Thread x .156 O.D. (5/32")
4-40 Thread x .187 O.D. (3/16")
4-40 Thread x .250 O.D. (1/4")
6-32 Thread x .250 O.D. (1/4")
Applications:
• Security • Camera Systems
• Sirens • Remote Controls
• Medical • Telecommunication
• Medical Carts • Coupling Devices
• Computer • PCB mounting
• PC/104 Modules
• Industrial Equipment • Robotic
• Animatronic • Electronic • Military
• Government • Aerospace
• Power Supplies & Conditioning
• Fuel Distribution • Power Supplies
• Custom Screw Machine Hardware
• Control Enclosures
• Integration Systems
• Circuit Board Assembly
• Airline • Aircraft • Slot Machines
• Marine • Entertainment
• Power Enclosures
• Musical Instruments
• Signs • Food Supply • Furniture
• Vending Machine
• Climbing • Archery • Firearms
• Ski • Snow Board Equipment
• Instrumentation • Commercial
• Fabrication • Construction
• Custom Enclosures
• Electronic Enclosures
• Equipment Manufacturing
• Wire and Cable • Exhibits
• Knife Manufacturing
• & Many Other Industries
Why choose us?
1. We are a professional manufacturer specializing in manufacturing
various metal parts, including CNC precision automatic lathe
machined parts, automatic lathe parts, milling machined parts, wire
cutting machined parts etc.
2. With experienced technical engineers and modern inspection
equipment, our factory can help you to lower cost at the moment of
worldwide financial crisis.
3. We are committed to focusing on the client's demand and
satisfaction, and to providing high quality products at competitive
prices according to your drawings or samples. Special parts for
your special needs!
4. Our strong R&D and QC department can control the products to
meet your strict requirment, 100% inspection on critical dimensions
with high accuracy +/-0.01-0.005mm.
5. Factory direct price and on time delivery.
6. Small quantity acceptable.
7. Free samples available.
8. OEM workable.
