Inconel601 Rod (5mm~80mm) , UNS N06601 , Werkstoff Nr.2.4851 High
temperature alloy
1.Description
It is face-centered cubic lattice structure for use at temperature
up to 1370°C (2500°F).The Nickel-Chromium alloy is characterized by
excellent inoxidability in the high temperature and sulfur
atmosphere,good resistance to carbonizing.It has high creep rupture
strength since it limits the carbon content and grain size, so
recommend to use for above 500°C environment.
2.Features
Excellent inoxidability in the high temperature(the temperature can
be up to 1180°C),good resistance to carbonizing,good inoxidabilitiy
in sulfur atmosphere,good mechanical property,good resistance to
stress corrosion cracking and high spalling resistance.
Chemical Content(%)
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | Al | P | S |
Inconel 601 | Min. | 58 | 21 | | | | | | 1.0 | | |
| Max. | 63 | 25 | Bal. | 0.1 | 1.5 | 0.5 | 1.0 | 1.7 | 0.02 | 0.015
|
Mechanical Properties
| Aolly status | Tensile strength
Rm N/mm² | Yield strength
R P 0.2N/mm² | Elongation
A 5 % | Brinell hardness
HB | Density
g/cm³ | Melting Point °C |
Annealing
treatment | 650 | 300 | 30 | - | 8.1 | 1320-1370 |
Annealing
treatment | 600 | 240 | 30 | ≤220 | 8.1 | 1320-1370
|
3.Usage
It is widely used in following field:
1)Petrochemical processing:separate tank of ammonia reforming and
catalytic support grid of nitric acid producing.
2)Industrial furnaces:steel shares at annealing and radiation
control, high-speed gas burners, Industrial furnace silk.
3)Gas turbine components:exhaust system parts,solid waste
incinerator's combustion chamber,channel support and soot dealing
parts,detoxification exhaust system components.
4)Heat treating equipment:the tray,basket and tool clamp in the
heat treatment factory,oxygen re-heater.
4.Specification
Round Wire:0.03mm~10mm
Flat Wire(Ribbon):thickness 0.1mm~1.0mm,width 0.5mm~5.0mm
Strip:thickness 0.2mm~3.0mm,width 0.5mm~200mm
Other sizes are available upon your request.
