Specifications
1. Material:SS316L/SS304
2. Steam pressure (Mpa):0.5-0.8
3. Evaporation temperature:45-90
4. Evaporation capaicty: 500~50000L/h
Equipment characteristics:
1. Full closed process, fast and low temperature evaporation;
2. Inside pipes are mirror polishing seamless sanitary pipes, so
material is not easy to paste on the pipe all, it's easy for
cleaning;
3. Low steam consumption: 1kg steam can evaporte 3.5kg water;
4. Low evaporation temperature:part of secondary steam can be
inhaled into single-effect heater through spray type hot pressure
pump, this would make full use of the heat and the evaporation
temperature is low.
5. Large concentration ratio: adopt falling film evaporation, which
make the material liquid with larger viscosity be easy to flow and
evaporate, hard to scale, short cocentration time, the
concentration ratio can reach to 1:5.
6. This equipment can realize automatic production, intellectual
system management, which is in conformity with GMP standard.
7. Can be desinged into different technological process according
to the different characteristics of the materials , also can
according to different users' requirements equip with automaticl
control system.
Application:
It's applicable for dairy products, pharmacy, glucose,
starch,chemical industry, xylose, citric acid, ammonium sulfate,
biological engineering, environmental engineering and waste liquid
recovery and treatement. etc.
Equipment structure:
It consists of (first-effect, second-effect,
third-effect)separators and evaporators and preheaters,condenser
and vaccum pump, feeding pump,circulation pump, discharge pump,
condensed water pump and system pipe fittings, etc. Equiped wit CIP
spraying cleaning ball, vacuum gauge, thermometer,pressure
gauge,and so on.
