SUS304 Raw Material Waste Mechanical Heat Recovery Unit For Spin Flash Drying Equipment

Waste heat recovery system

China supplier waste heat recovery H finned tube boiler economizer

Introduction
Boiler economizers are heat exchange devices with finned tubes that heat a liquid, sometimes water, up to however sometimes doesn't exceed the boiling purpose of liquid.

We can manufacture three types of boiler economizer, bare tube economzier, H finned tube economzier and spiral finned tube economzier.

Technical specifications:

H-finned tube economizer is high efficient heat exchanger economizer which is consisted of H-finned tubes.

Compared with bare tube economizer, H-finned tube economizer can enlarge the heat exchange area and reduce the number of tubes. It also can increase the flue gas flow area in order to reduce the flue gas flow speed and abrasion.

H-finned tube can be made as double H finned tubes , with high rigidness to fit long tube row.

The spiral finned economizer is a newly designed heat transfer equipment, consists of spiral fin tubes to overcome the serious abrasion anh short service time.

Description :

Main technical advantages of our low temperature economizer

1. The equipment body can be designed into many modules to ensure the long term and stable running;

2. The low temperature economizer manufatured by our company can guarantee the wall temperature is 5-10 ºC higher than the acid , and flue outlet temperature is 10-15 ºC higher than the wall surface temperature

3. Wall surface temperature can be adjusted according to the boiler load and fuel changer to avoird corrosion under low temperature

4. Changer the DCS system of the existing boiler to achieve the auto and remote control by computer

The accessory

Application case:

Modern boilers, like in coal power plants, still equipped with economizers that are descendants of the initial style of the inexperienced. during this context they are usually said because the feed hot-water tank and hot atmospheric phenomenon from the rotary engine before it's pumped-up to the boiler.

Working principle

The wet air enter into the heating area from the bottom of the equipment.

After the bottom of hot pipe absorb the heat, and the working medium in the hot pipe will be evaporated, and absorb Evaporated heat from the wet air . after evaporation , the steam will go up to the top of the hot air , meanwhile , it can be pre-condensed ,and release the potential heat to the hot air radiating area . and the condense will back return by the gravity heavy , and continuously receive heat , and repeat delivering the heat from the heating area to the heat radiating area,and heat the fresh for waste heat recovery .

Changzhou Yibu Drying Equipment Co., Ltd. is a leading manufacturer of drying, mixing, and granulating equipment in China, a specially-designated enterprise of China Association for Pharmaceutical Equipment (CAPE) and China General Machinery Industry Association (CGMA) Drying Equipment Branch. The factory covers an area of over 50,000 m2, has fixed assets of CNY 35 million, with more than 180 sets of special processing equipment and strong technical force. The company owns the provincial famous trademark of "YIBU", and has passed the ISO9001 & ISO14001 certifications.
The founder, Mr Zha Guocai has devoted more than 30 years in R&D, production and business of drying equipment. He holds the post of Deputy Director-General of China General Machinery Industry Association (CGMA) Drying Equipment Branch for a long time. The company pays great attention to science and technology innovation, has collaborated with Medicine Design Institutes in Shanghai, Wuhan, Chongqing and other places, Shenyang Chemical Research Institute, Qinghua University, Shanghai Jiaotong University, Dalian University of Technology, etc. The company launched 3-5 new products to the market every year. In 1998, YIBU established "China Research Center of Drying and Granulating" with the approval of relevant state department, and cooperated with pharmaceutical, chemical and food industries to research and develop new technologies related to drying, granulating and mixing, etc. The factory also has a variety of test prototypes in the laboratory for customers' trials.
The company sold equipment to USA, Mexico, Columbia, Guatemala, Brazil, Peru, Australia, New Zealand, Ghana, Russia, Cyprus, Greece, Iran, Indonesia, Philippines, Korea, Japan, Taiwan, Hong Kong and other countries.