ABB Module PM633 3BSE008062R1 ABB PM633 3BSE008062-R1 Processor
Module Highest version
Product Description:
If the open-circuit or short-circuit monitoring is configured, the
detected error is displayed by the red LED Ovl as long as it is
present. In the PLC system an error message is stored (FK4, error
number 9).
In order to avoid error messages with unused analog inputs, it is
useful, not to configure this channels for Pt100. Connection of
Pt100 temperature sensors in 3-wire configuration If the sensors
are located close together, only one core is needed as
the return wire AGND1. In the operating mode "Pt100 in 3-wire
configuration" two adjacent analog inputs belong together (e.g. EW
6,00 and EW 6,01). For configuration, both inputs must be
configured to the
desired operating mode, see configuration table Fig. The constant
current of the one channel flows through the Pt100 resistance
sensor, the constant current of the other channel through one of
the wires.
The basic unit 07 KT 94 calculates the measuring value from the two
voltage drops and stores it under the odd address
Related Product Recommendation:
| XI16E1 1SBP260100R1001 | NISA-03 | PM632 3BSE005831R1 |
| XM02 XM 02 | NTAC-02 | PM633 3BSE008062R1 |
| XM03 XM 03 | NTAI05 | PM645C 3BSE010537R1 |
| XM06B5 1SBP260103R1001 | NTAI06 | PM810V2 3BSE013220R1 |
| XN03 XN 03 | NTCL01 | PM860K01 3BSE018100R1 |
| XN05 XN 05 | NTCL01-A | PM861AK01 3BSE018157R1 |
| XN06 XN 06 | NTCS04 | PP835A 3BSE042234R2 |
| XO08R1 XOO8R1-B04 1SBP260101R1001 | NTDI0-A | PU513V2 3BSE013034R1 |
| XP01 XP 01 | NTDI01 | PU514 3BSE013062R1 |
| XU03 XU 03 | NTRO02 NTRO02-A | PU515A 3BSE032401R1 |
| XU04 XU 04 | NTRO02-A | RDCU-02C |
| XV371A | NTRO02-A NTRO02 | REF610 |
| YPH107A 3ASD573001A9 | PAB02 P70870-4-0369059 369059A10 | REF615 |
| YPH108B/SPC | PCU-03 | RF616 3BSE010997R1 |
| YPK113A 5761857-4A | PE1364B | RL01 RL 01 |
| YPQ110A 3ASD573001A5 | PHARPS32200000 | RS01 RS 01 |
| YPQ112A | PHARPS62200000 | SA610 3BHT300019R1 |
| YT296000-MZ YXU149B YXU 149B | PHARPSPEP11013 | SAFT-188-IOC SAFT 188 5761744-6D |
| YXO116 4890024-LC | PM150V08 3BSE003641R1 | SAFT112POW SAFT 112 POW |
| YXO124 4890024-LF | PM253V01 | SAFT121PAC SAFT 121 PAC |
| YXO126 4890024-UN YXO 126 | PM510 3BSE000270R1 | SAFT132CBS SAFT 132 CBS |
| YXT115B 4890024-NK | PM511V08 3BSE011180R1 | SAFT132CBS SAFT 132 CBS 57411619 |
| YXU144 YT296000-MC YXU 144 | PM630 3BSE000434R1 | SAFT185TBC SAFT 185 TBC 58119687 |
| YXU149 YT296000-RX | PM253V01 | 3HAC14550-4 |
| SNAT633PAC SNAT 633 PAC 61049444 | PM510 3BSE000270R1 | 3HAC14551-2 |
| SNAT7780 | PM511V08 3BSE011180R1 | 3HAC17484-8 |
| SPGU240A1 SPGU 240 A1 | PM630 3BSE000434R1 | 3HAC17484-9 |
| SPNPM22 | DSMB175 | 3HNE00313-1 |
Product's Character:
In order to avoid measurement errors, it is absolutely necessary,
to lead the cores to the Pt100 sensors in the same cable. The cores
must have the same cross section. Per channel, a twisted pair is
used (for the two terminals of the Pt100 sensors) plus a single
core (half of a twisted pair) for the connection to AGND1.
Depending on the configured operating mode, the measured value is
assigned linearly as follows the return wire AGND1. In the
operating mode "Pt100 in 3-wire configuration" two adjacent analog
inputs belong together (e.g. EW 6,00 and EW 6,01). For
configuration, both inputs must be configured to the desired
operating mode, see configuration table Fig. The constant current
of the one channel flows through the Pt100 resistance sensor, the
constant current of the other channel through one of the wires.
The basic unit 07 KT 94 calculates the measuring value from the two
voltage drops and stores it under the odd address
CI522AK06 3BSE018453R1 ABB Cable Kit ABB
CI526 3BSE006085R1 CI526 Interface Module ABB
CI526V1 3BSE012870R1 CI526 Interface Module ABB
CI531 3BSE003825R1 RS-232 Interface Submodule ABB
CI532V01 3BSE003826R1 RCOM Interface Submodule ABB
CI532V02 3BSE003827R1 MODBUS Interface ABB
CI532V03 3BSE003828R1 Communication Interface Module - Siemens
3964(R) ABB
CI532V04 3BSE003829R1 AB Interface ABB
CI532V05 3BSE007297R1 Generic MVI Module ABB
CI532V09 3BUP001190R1 Accuray Interface Module ABB
CI534V02 3BSE010700R1 MODBUS Interface Submodule ABB
CI534V04 3BSE010702R1 Allen- Bradley Interface Sub Module ABB
CI535 3BSE003830R1 Free- Programmable MVI Sub Module ABB
CI540 3BSE001077R1 CI540 S100 I/O Bus Extension ABB
CI541 3BSE014665R1 Profibus Interface Sub Module ABB
CI541V1 3BSE014666R1 Profibus Interface Sub Module ABB
CI545 3BSE011063R1 Ethernet MVI Module ABB
CI545V01 3BSE011063R1 Ethernet MVI Module ABB
CI547 3BNP004429R1 MB300 Communication Board with Slave Processor
ABB
CI560 3BUC98002R0001, 3BUC980002R1 TRIO Field Bus Interface Module
ABB
CI570 3BSE001440R1 CI570 MasterFieldbus Controller ABB
CI572 3BSE017712R1 LonWorks Communications Module ABB
CI610 3BHT300003R1 I/O Bus Extender ABB
CI615 3BHT300024R1 ABB I/O Bus Coupler ABB
CI615K01 3BSE000756R1 Bus Extension Kit ABB
CI626V1 3BSE012868R1 Communication Interface Module ABB
CI627 CI627 Communication Interface Module ABB
CI627A Bus Administrator Module ABB
CI630 3BSE011000R1 CI630 AF100 Communication Interface Module ABB
The use of the product:
1.auto ancillary.
2.non-ferrous metal smelting.
3.construction machinery,
Product's advantages:
1.parking, automobile,
2.Power industry,
3.the elevator industry,
Our advantages:
1.mission reduction
2.We keep more than 10 thousands Transistors in warehouse, it could
cut lead time of most items.
3.Customer service in 1-4 hours. If there's any question, please
contact with our sales.
Frequently Asked Questions:
1.Q: What is the capacity of your warehouse?
A: We have 1-2Mil USD safe stocks and 3 warehouses, which located
Xiamen,
Shenzhen & Hongkong.
2.Q:What about your shipping terms ?
A: We can ship by DHL,UPS,FEDEX,ARAMAX,TNT,and so on
3.Q:What about your lead time ?
A: We have many itmes in stock , 3-5 days you will receive it .
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
