ABB Module SAFT132CBS SAFT 132 CBS 57411619 ABB SAFT132CBS STROMBERG quick response

ABB Module SAFT132CBS SAFT 132 CBS 57411619 ABB SAFT132CBS STROMBERG quick response

Product Description:

The technical specifications of the inputs are the same with the other digital inputs, but with the following
exception: Caused by the direct electrical connection with the output, the varistor for demagnetization of inductive loads (see figure above) is also in effect at the input. Therefore, the voltage difference between UP5 and the input signal must not be greater than the limit voltage
of the varistor.If the counter is used in the operating modes 1 or 2 (up-counter), the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to
be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").

Related Product Recommendation:

Product's Character:

If all of the 8 channels of the group are used as inputs, and if in addition the UP5 terminal is left unconnected, no restrictions exist for the inputs. The input signal voltages then may be within -30 V and +30 V. There is no restriction for the input/output group concerning its safety against reversed polarity.
of the varistor.If the counter is used in the operating modes 1 or 2 (up-counter), the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to
be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").Features of the analog inputs:The 8 analog inputs are not electrically isolated.The resolution of the A/D converter is 12 bits. Analog signals are conducted in shielded cables (seeThe analog inputs can be configured individually in a lot of different operating modes (even as digital inputs). The configuration is performed by setting certain bits in the system constants KW 86,00 to KW 86,07 as follows

DI840 3BSE020836R1 Digital Input Module ABB
DI85-8B 57574771A, 5760228-7D DI 85-8B Digital Input Module ABB 1
DI86-32 57275782 Digital Input Board ABB
DI885 3BSE013088R1 Digital Input Module -SOE ABB
DI890 3BSC690073R1 DI890 Digital Input w/ Intrinsic Safety Interface ABB
DIO-400 PHBDIO40010000 Digital I/O Module - Harmony Block I/O ABB
DKL01501 Digital Servodrive DKL ABB
DLM 01 P 37421-4-0369652 DLM01 Link Module ABB
DLM 02 P 37421-4-0338434 DLM02 Link Module ABB
DO-02-16 FDO0216 Digital Output Module ABB
DO0116 FDO0116 Digital Output Module Bailey
DO210 492953501 Digital Output Module ABB
DO610 3BHT00006R1 Digital Output Module ABB

DO620 3BHT300009R1 DO620 Digital Output Module ABB
DO630 3BHT300007R1 Digital Output Module ABB
DO801 3BSE020510R1 S800L DO801 Digital Output ABB
DO802 3BSE022364R1 S800L DO802 Digital Output, Relay. ABB
DO810 3BSE008510R1 DO810 Digital Output Module ABB
DO814 3BUR001455R1 DO814 Digital Output Module ABB
DO815 3BSE013258R1 Digital Output Module - 24Vdc ABB
DO820 3BSE008514R1 Digital Output Relay Module - N.O. ABB
DO821 3BSE013250R1 Digital Output Module - Relay ABB
DO840 3BSE020838R1 Digital Output Module ABB
DO86-16 57275758 Digital Output Module ABB
DO880 3BSE028602R1 Digital Output Module ABB
DO890 3BSC690074R1 DO890 Digital Output w/ Intrinsic Safety Interface ABB
DO910S 3KDE175321L9100 Digital Output Module ABB
DO930N 3BDS014114 Relay Output Module ABB
DOC-01 Output Module ABB
DOT100 PHBDOT10010000 DOT-100 Digital Output Block ABB
DOT120 PHBDOT12010000 Digital Output Module ABB
DP640 3BHT300057R0001 DP640 Speed Measurement Module ABB
DP820 3BSE013228R1 Pulse Counter ABB
DP840 3BSE028926R1 Pulse Counter or Frequency Measurement Module ABB
DPW 01 P3761158018181, 8018181M DPW01 Power Supply ABB
DPW 02 Power Supply - 24 Vdc Input ABB
DPW03 P37611-5-8018644, 8018544M DPW 03 Power Supply Module ABB
DRA 02 37411-4-0369673 DRA 02 Card Rack ABB
DRA 03 0369674M DRA 03 Freelance Rack, 3 Slot ABB
DRA 04 0369675M DRA 04 Freelance Rack, 5 Slot ABB
DSAI 133 57120001-PS Analog Input Board 32 Channels ABB
DSAI 133N 3BSE018526R1 Analog Input Module ABB
DSAI110 57120001-DP DSAI 110 Analog Input Module ABB

The use of the product:

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.