ABB Module NTRO02-A NTRO02 ABB NTRO02 A NTRO02 Road Car New Sealed
Product Description:
IResolution in the PLC system: The measured values are converted
with a resolution of
12 bits, i.e. 11 bits plus sign for voltage and 12 bits without
sign for current. The ranges 0...5 V und ±5 V are converted with 10
bits plus sign.the output A 62,00 is only available for the
counter. If the output is to use as a normal digital output, it has
to Further details can be found in volume 2, chapter 5.1 "General
information for the use of analog inputs and outputs". In order to
make sure, that unused input channels have a defined 0V level, they
may be shorted to AGND. Unused inputs must be configured with
"unused".
The relationship between the analog input signals and the converted
numbers is illustrated in the following figures. be made sure, that
the high-speed counter is not configured to the operating modes 1
or 2 (see also the chapter "High-speed counter").Features of the
analog inputs:The 8 analog inputs are not electrically isolated.The
resolution of the A/D converter is 12 bits. Analog signals are
conducted in shielded cables (seeThe analog inputs can be
configured individually in a lot of different operating modes (even
as digital inputs). The configuration is performed by setting
certain bits in the system constants KW 86,00 to KW 86,07 as
follows
Related Product Recommendation:
| A8PU05ABFW02 | PDV01 | 07MK92 GATS110098R0161 |
| AI610 3BHT300000R1 | PE01 | 07MK92 GJR5253300R1161 |
| AI625 3BHT300036R1 | PEA01 | 07NG61R1 GJV3074311R1 |
| AI630 3BHT300011R1 | PEA02 | 07NG63R1 GJV3074313R1 |
| AI810 3BSE008516R1 | PEA03 | 07PS62R2 GJV3074332R2 |
| AI830A 3BSE040662R1 | PEB02 | 07SK90R1 GJR5250200R0001 |
| AV31 AV 31 | PEB03 | 07ZE61R302 GJV3074321R302 |
| AV43 AV 43 | PGM01 | 07ZE63R302 GJV3074323R302 |
| AX460 | LL02 | 086363-002 OSPS2 |
| AX521 1SAP250100R0001 | LL03 | 1700RZ10005C |
| AX645 3BHB001914R1 3BHB001914R0001 | LM01 | 1SAR330020R0000 |
| BRC-100 P-HC-BRC-10000000 | LM21 | 200-CICN 200-CIE |
| BRC100 BRC-100 P-HC-BRC-10000000 | LT02 | 2012AZ10101B |
| BRC300 PHCBRC30000000 | LZ01 | 35AE92A ER0002081060005 |
| C100/0100/STD | LZ02 | 3ASC25H705/7 |
| C1900/0263/0260A C1900/0263 | MA01 | 3ASU21C110 LU6278 DCU30/7 |
| C1900/0363 C1900/0363/0360A | MA02 | 3AUA489002B4562 |
| C300/0010/STD | MA03 | 3BHE022291R0101 PCD230A |
| ADSAO301 | MA12 | 3BHE023784R2530 |
| CI522 3BSE012790R1 | MB01 | 3BHE024577R0101 PP C907 BE |
| CI522A 3BSE018283R1 | MB02 | 3BSE001245R1 3BSC640008R1 |
| CI526 3BSE006085R1 | MB11 | 3BSE003879R1 |
| CI531 3BSE003825R1 | MB12 | 3BSE011316R1 SDCS-PIN-52 |
| CI532V01 3BSE003826R1 | MB21 | 3HAC14550-4 |
| CI532V02 3BSE003827R1 | 57310001-MP/2 | 3HAC14551-2 |
| CI532V02 3BSE003827R1 | DSSR122 | 3HAC17484-8 |
| CI532V04 3BSE003829R1 | 48990001-NK | 3HAC17484-9 |
Product's Character:
Features of the digital inputs/outputs:The 8 digital inputs/outputs
are arranged in one group.
The group as a whole is electrically isolated from the rest of the
device. The inputs/outputs can be used individually as input,
output or re-readable output. If the terminals are used as digital
inputs, the input
signal delay can be configured to 7 ms (default) or to 1 ms. The
configuration is performed by setting certain bits in the system
constant KW 85,01 as follows: If the terminals are used as digital
outputs, the output signals "1" are individually monitored by the
re-readable input. If the output status is wrong, anoverall error
message is generated for the involved output group. The error is
displayed by the red LED Ovl. and by error flags of the PLC then.
The error could have been caused by overload, shortcircuit
or missing supply voltage UP5/ZP5.
PW 01 P3761158018181, 8018181M DPW01 Power Supply ABB
DPW 02 Power Supply - 24 Vdc Input ABB
DPW03 P37611-5-8018644, 8018544M DPW 03 Power Supply Module ABB
DRA 02 37411-4-0369673 DRA 02 Card Rack ABB
DRA 03 0369674M DRA 03 Freelance Rack, 3 Slot ABB
DRA 04 0369675M DRA 04 Freelance Rack, 5 Slot ABB
DSAI 133 57120001-PS Analog Input Board 32 Channels ABB
DSAI 133N 3BSE018526R1 Analog Input Module ABB
DSAI110 57120001-DP DSAI 110 Analog Input Module ABB
DSAI130 57120001-P DSAI 130 Analog Input Module ABB
DSAI130A 3BSE018292R1 DSAI 130A Analog Input Module ABB
DSAI145 5712001-HA RTD Input Module ABB
DSAI146 3BSE007949R1 RTD Input Module ABB
DSAI155 57120001-HZ Thermocouple Module ABB
DSAI155A 3BSE014162R1 Thermocouple Module ABB
DSAI303 57120001-CL Analog Input Board ABB
DSAI305 57120001-BX/3 Analog Input Board ABB
DSAO 110 57120001-AT Analog Output Module ABB
DSAO 130 57120001-FG DSAO130 Analog Output Board 16 Channels ABB
DSAO120 57120001-EY DSAO 120 Analog Output Module 8 Channels ABB
DSAO120A 3BSE018293R1 Analog Output Board ABB
DSAO301 57120001-DZ/4 Analog Output Board ABB
DSAV110 57350001-E Driver Module Video ABB
DSAV111 57350001-CN DSAV 111 Video Generator Module ABB
DSAX110 57120001-PC/5, 57120001-PC/6 DSAX 110 Analog Input/Output
Module ABB
The use of the product:
1.Power industry,
2.transmission and distribution.
3.construction machinery,
Product's advantages:
1.2000+ suppliers with us, we could help you to get any components
which is difficult to get.
2.365 days warranty for all the goods from us.
3.2000+ suppliers with us, we could help you to get any components
which is difficult to get.
Our advantages:
1. Optimize plant operations
2.365 days warranty for all the goods from us.
3.2000+ suppliers with us, we could help you to get any components
which is difficult to get.
Frequently Asked Questions:
1. Q: Are the P/N latest?
A: Yes. All P/N are latest and date codes are in 2016 or 2017.
2.Q:Does your goods are new and original ?
A: yes ,they are new and original
3.Q:How long warranty does Moore can provide ?
A: Moore can provide 1 year warranty !
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
