Allen Bradley Modules 1785-L40C 1785 L40C AB 1785L40C Read Description W70

Allen Bradley Modules 1785-L40C 1785 L40C AB 1785L40C Read Description W70

Product Description:

Advanced multi-processor design for leading-edge velocity loop bandwidth, fully digital current, velocity, and position loopsLarge-scale integration with custom ASICs and IPMs for performance and reliabilityA 16-bit A/D convertor for precise velocity command input Flash memory for simple field upgrades A personality module to store setup parameters and simplify drive replacement Reduced component count for reliability Internally-shielded filters for electromagnetic compatibility (EMC) Four dedicated I/O plus eight user-selectable, optically isolated digital inputs and outputs (sourcing/active high):Two dedicated inputs Two dedicated outputs Four user-selectable inputs Four user-selectable outputs Two analog inputs for external current limit Two analog outputs for variable monitoring or torque sharing The purpose of this manual is to provide the user with the necessary information to install, program, start up and maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and understood before proceeding. Particular attention must be directed to the ATTENTION and Important statements contained within.

Related Product Recommendation:

Product's Character:

The ground conductor of the motor cable should be connected to the drive ground (GRD) terminal directly. Connecting this ground conductor to a cabinet ground point or ground bus bar may cause high frequency current to circulate in the ground system of the enclosure. The motor end of this ground
conductor must be solidly connected to the motor case ground. Shielded or armored cable may be used to guard against radiated emissions from the motor cable. The shield or armor should be connected to the drive ground terminal and the motor ground as outlined in the Grounding section of this Installation
chapter. Common mode chokes are recommended at the drive output to reduce the common mode noise. An RFI filter can be used and in most situations provides an effective reduction of RFI emissions that may be conducted into the main supplylines. If the installation combines a drive with sensitive devices or circuits,it is recommended that the lowest possible drive PWM frequency be programmed.

1771-IBN Digital Input Module AB
1771-IC Digital Input Module AB
1771-ID Digital Input Module AB
1771-ID01 Digital Input Module AB
1771-ID16 Digital Input Module AB
1771-IE Analog Input Module AB
1771-IFE Analog Input Module AB
1771-IFF Analog Input Module AB
1771-IFMS Analog Input Module AB
1771-IG TTL Input Module AB
1771-IGD TTL Input Module AB
1771-IH Digital Input Module AB
1771-IJ Encoder/Counter Module AB
1771-IK Encoder/Counter Module AB
1771-IL Analog Input Module AB
1771-IM Digital Input Module AB
1771-IN Digital Input Module AB
1771-IND Digital Input Module AB
1771-IQ Digital Input Module AB
1771-IQ16 Digital Input Module AB
1771-IQC Digital Input Module AB
1771-IR Analog Input Module AB
1771-IS Digital Input Module AB

1771-IT Digital Input Module AB
1771-IV Digital Input Module AB
1771-IVN Digital Input Module AB
1771-IXE Analog Input Module AB
1771-IXHR Analog Input Module AB
1771-KA2 Data Highway Communications Adaptor AB
1771-KG Data Highway Communications Module AB
1771-NB4S Analog Combination Module AB

Hitachi CB100A SECS Interface Kokusai Zestone DD-1203V used working

XP F4A3A4A6 Power Supply Lot of 3 AMAT Reflexion 300mm Interface FEM used works

AMAT MA-0190-14415-01 Pressure Display Assembly AMAT Reflexion 300mm used works

AMAT 0010-12411 Centura 4.0 FI Controller Rev 001 CP3308-S000361 used working

AMAT 0010-24210 Centura 4.0 FI Controller Rev 001 CP3308-S000535 used working

Schroff AMAT Reflexion Interface PCB Control Chassis CPCI-14562-003 working

Brooks 013077-089-20 Load Port Fixload 25 AMAT SemVision cX used working

Edwards D02173000 Active Pirani Gauge APG-L-NW16 AMAT SemVision cX used works

Varian 9699037S008 Turbo-V 300HT Macro Torr Pump TV 300HT AMAT SemVision cX used

A to Z Electronics 50317800000 SMC Control Chassis AMAT SemVision cX working

Varian L6280-301 Manual Angle Valve NW-16-H/O SemVision cX used working

Opal Kai-Tek CCS Board 50312560000 Circuit Board AMAT SemVision cX working

HiTek G303/51 High Voltage Power Supply 50414710200 AMAT SemVision cX used works

Varian Diode Ion Pump Small AMAT SemVision cX used working

MKS LPV-25-S5-CLVS Vacuum Valve Assembly AMAT SemVision cX used working

Opal A to Z Electronics 50312350000 Controller 50312354000 working

AMAT SemVision PCB12489 Circuit Board 13811 AMAT SemVision cX working

A to Z Electronics 50714800000 Fiber Optic Comm Interface FOCI SemVision cX used

A to Z Electronics 30612100400 VACR Pressure Display AMAT SemVision cX working

Pneutal SCP-160-A-1 10 bar Air Tank AMAT Semvision cX used working

The use of the product:

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.