Allen Bradley Modules 1775-L4 1775 L4 AB 1775L4 Main Processor module High quality

Allen Bradley Modules 1775-L4 1775 L4 AB 1775L4 Main Processor module High quality

Product Description:

The ground conductor of the motor cable should be connected to the drive ground (GRD) terminal directly. Connecting this ground conductor to a cabinet ground point or ground bus bar may cause high frequency current to circulate in the ground system of the enclosure. The motor end of this ground
conductor must be solidly connected to the motor case ground. Shielded or armored cable may be used to guard against radiated emissions from the motor cable. The shield or armor should be connected to the drive ground terminal and the motor ground as outlined in the Grounding section of this Installation
chapter. Common mode chokes are recommended at the drive output to reduce the common mode noise. An RFI filter can be used and in most situations provides an effective reduction of RFI emissions that may be conducted into the main supplylines. If the installation combines a drive with sensitive devices or circuits,it is recommended that the lowest possible drive PWM frequency be programmed.

Related Product Recommendation:

Product's Character:

Advanced multi-processor design for leading-edge velocity loop bandwidth, fully digital current, velocity, and position loopsLarge-scale integration with custom ASICs and IPMs for performance and reliabilityA 16-bit A/D convertor for precise velocity command input Flash memory for simple field upgrades A personality module to store setup parameters and simplify drive replacement Reduced component count for reliability Internally-shielded filters for electromagnetic compatibility (EMC) Four dedicated I/O plus eight user-selectable, optically isolated digital inputs and outputs (sourcing/active high):Two dedicated inputs Two dedicated outputs Four user-selectable inputs Four user-selectable outputs Two analog inputs for external current limit Two analog outputs for variable monitoring or torque sharing The purpose of this manual is to provide the user with the necessary information to install, program, start up and maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and understood before proceeding. Particular attention must be directed to the ATTENTION and Important statements contained within.

1746-IV8 Current Sourcing DC Input Module AB
1746-N2 Card Slot Filler AB
1746-NI16I High Resolution Analog Input Module - Current AB
1746-NI16V High Resolution Analog Input Module - Voltage AB
1746-NI4 High Resolution Analog Input Module AB
1746-NI8 High Resolution Analog Input Module AB
1746-NIO4I High Resolution Analog Input/Output Module AB
1746-NIO4V High Resolution Analog Input/Output Module AB
1746-NO4I Analog Current Output Module AB
1746-NO4V Analog Voltage Output Module AB
1746-NO8I Analog Current Output Module AB
1746-NO8V Analog Voltage Output Module AB
1746-NR4 RTD Input Module AB
1746-NR8 RTD Input Module AB
1746-NT4 Thermocouple Input Module AB
1746-NT8 Thermocouple Input Module AB
1746-OA16 120/240V AC Output Module AB
1746-OA8 120/240V AC Output Module AB

1746-OAP12 High Current 120/240V AC Output Module AB
1746-OB16 Current Sourcing DC Output Module AB
1746-OB16E Isolated Sourcing DC Output Module AB
1746-OB32 Current Sourcing DC Output Module AB
1746-OB32E Isolated Sourcing DC Output Module AB
1746-OB6EI Isolated Sourcing DC Output Module AB
1746-OB8 Current Sourcing DC Output Module AB
1746-OBP16 High Current Sourcing DC Output Module AB
1746-OBP8 High Current Sourcing DC Output Module AB
1746-OG16 Current Sinking TTL Output Module AB
1746-OV16 Current Sinking DC Output Module AB
1746-OV32 Current Sinking DC Output Module AB
1746-OV8 Current Sinking DC Output Module AB
1746-OVP16 High Current Sinking DC Output Module AB
1746-OW16 Relay Output Modle AB

ASML 4022.470.0889 CCM Remote Control Box Ver. 5 ASML Reticle Handler used works

Nikon SPA355A RF Linear Motor Controller 4S587-473-1 Nikon NSR-S307E used works

New Focus Model 8752 Picometer Ethernet Controller used working

Sumitomo X88D1-0001 Linear Motor Driver 4S587-651 Nikon NSR-S307E used working

Nikon 4S586-947-2 Linear Motor Controller SPA236A Nikon NSR-S205C used working

Yaskawa CLSR-0420-N2CD-1 RF Linear Motor Controller 4S587-688-1 NSR-S205C works

CMC AM422670P000 Motion Controller Aximate/C AMAT SEMVision cX used working

Yaskawa 4S586-959-6 Linear Motor Controller CLSR 0420-N2CB-1 Nikon NSR used

Yaskawa 4S586-959-5 Linear Motor Controller CLSR 0420-N2CB Nikon NSR used works

Nikon SPA355C RF Linear Motor Controller 4S588-087 Nikon NSR-S307E used working

Sumitomo M28512 ADE1 V Control Unit 4S587-280-2 Nikon NSR Series used working

Nikon 4S588-087 RF Linear Motor Controller SPA355B Nikon NSR-S307E used working

Nikon SPA454D MSCR Linear Motor Controller 4S588-065-1 Nikon NSR-S307E works

Nikon SPA454A MSCL Linear Motor Controller 4S587-471-2 Nikon NSR-S307E works

Nikon 4S586-950-4 Linear Motor Controller SPA432B Nikon NSR-S205C used working

Nikon 4S586-949-4 Linear Motor Controller SPA432A Nikon NSR-S205C used working

Sumitomo ADE1 H Control Unit 4S587-598 M28557 Nikon NSR-S205C used working

Nikon 4S587-468-2 WX Linear Motor Controller SPA451A Nikon NSR-S307E used works

Sumitomo M28511 ADE1 H Control Unit 4S587-245-2 Nikon NSR Series used working

Nikon 4S588-064 MSCL Linear Motor Controller SPA454C Nikon NSR-S307E used works

Nikon 4S587-470-3 Linear Motor Controller SPA452B Nikon NSR-S307E Wafer Loader

Nikon 4S587-472-2 Linear Motor Controller SPA454B Nikon NSR-S307E used working

The use of the product:

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.