Allen Bradley Modules 1746SC-NO8I 1746SC NO8I AB 1746SCNO8I Analog
Current Output Module For new products
Product Description:
When the drive mounted HIM is supplied, it will be connected as
Adapter 1 (see Adapter in Chapter 2) and visible from the front of
the drive. The HIM can be divided into two sections; Display Panel
and Control Panel. The Display Panel provides a means of
programming the drive and viewing the various
operating parameters. The Control Panel allows different drive
functions to be controlled. Refer to Figure and the sections that
follow for a description of the panels.Important: The operation of
some HIM functions will depend upon drive parameter settings. The
default parameter values allow full HIM
functionality.HIM OPERATION When power is first applied to the
drive, the HIM will cycle through a series of displays. These
displays will show drive name, HIM ID number and communication
status. Upon
completion, the Status Display will be shown. This display shows
the current status of the drive (i.e. “Stopped,”“Running,” etc.) or
any faults that may be present (“Serial Fault,” etc.). If the HIM
software is Series A version3.00
Related Product Recommendation:
| 1442-PS-0807M0005N | 1794-IB16D | 1747-L542 |
| 1442-PS-0807M0010A | 1794-IB8 | 1747-L543P |
| 1442-PS-0807M0010N | 1794-IE4X0E2 | 1747-L551 |
| 1442-PS-0809M0005A | 1794-IE4XOE2 | 1747-L553 |
| 1442-PS-0809M0005N | 1794-IF2XOF2I | 1747-M11 |
| 1442-PS-0809M0010A | 1794-IF4I | 1747-MNET |
| 1442-PS-0809M0010N | 1794-IJ2 | 1747-OCPCM2 |
| 1442-PS-0812E0005A | 1794-L34 | 1747-OCVGA1 |
| 1442-PS-0812E0005N | 1794-OA8 | 1747-SCNR |
| 1442-PS-0812E0010A | 1794-OA8I | 1747-SDN |
| 1442-PS-0812E0010N | 1794-OB16 | 1747OC-EBCBA |
| 1442-PS-0812M0005A | 1794-OB16P | 1756-A17 |
| 1442-PS-0812M0005N | 1794-OB32P | 1756-BA1 |
| 1442-PS-0812M0010A | 1794-OB8 | 1756-BA2 |
| 1442-PS-0812M0010N | 1794-OB8EP | 1756-CFM |
| 1442-PS-0815M0005A | 1794-OE4 | 1756-CN2 |
| 1442-PS-0815M0005N | 1794-OE8H | 1756-CN2R |
| 1442-PS-0815M0010A | 1794-OF4I | 1756-CNB |
| 1442-PS-0815M0010N | 1794-PS1 | 1756-CNB |
| 1442-PS-0816E0005A | 1794-TB2 | 1756-CNBR |
| 1442-PS-0816E0005N | 1794-TB3 | 1756-DHRIO |
| 1442-PS-0816E0010A | 1794-TB32 | 1756-DHRIO |
| 1442-PS-0816E0010N | 1794-TB3G | 1756-DMA31 |
| 1442-PS-0820E0005A | 1794-TB3S | 1756-DMD30 |
| 1442-PS-0820E0005N | 1794-TBN | 1756-DMF30 |
| 1442-PS-0820E0010A | 1794-TBNF | 1756-DNB |
| 1442-PS-0820E0010N | 1756-L1M2 | 1756-DNB/D |
| 1442-PS-0807M0005A | 1747-KE | 1756-EN2F |
| 1442-DR-5890 | 1747-L20C | 1756-EN2T |
| 1442-EC-1140A | 1747-L30C | 1756-EN2TXT |
| 1756-M02AE | 1747-L514 | 1756-EN3TR |
Product's Character:
ULTRA 100 and 200 drives are feature-rich, high-performance drives
that offer the flexibility to handle a wide range of applications.
You can set up the ULTRA 100/200 drives as indexing drives,
velocity servo drives, stepper drives, or master encoder followers.
With the DeviceNet option, you can remotely commission and
reprogram ULTRA 100 drives. In addition, you can use the ULTRA
100/200
drives host command protocol to set up multiple drives. Available
in seven power ranges, theULT RA100/200 drives can be mated to four
high-performance brushless servo motor lines. Ultra Master
software, a Windows-based interface, provides you with a familiar
programming environment and a powerful commissioning tool for all
ULTRA 100/200 drives.ULTRA 200 positioning drives deliver
full-featured flexibility and impressive power and performance.
Each ULTRA 200 drive provides:115 to 230V AC single phase input
(single phase or three phase for the 75 amp version, three phase
only for the 150 amp version) Phase-to-phase and phase-to-ground
short circuit protection An internal resistive shunt A built-in
auxiliary AC input (to power logic only) Built-in power supplies
(including 24V I/O supply)—no external sourcerequired (except AC
line) The ability to drive sinusoidal AC brushless motors An DC bus
available externally for power leveling or for use of shared power
supplies
1745-PT1 Hand Held Programmer AB
1745-TCAT TCAT SLC-100 Timer Counter Access Terminal AB
1746-A10 10-Slot Chassis AB
1746-A13 13-Slot Chassis AB
1746-A2 2-Slot Expansion Rack AB
1746-A4 4-Slot Chassis AB
1746-A7 7-Slot Chassis AB
1746-BAS BASIC Language Module AB
1746-BAS-T BASIC Language Module - High Speed AB
1746-BLM Blow Molding Module AB
1746-BTM Barrel Temperature Module AB
1746-C16 Chassis Interconnect Cable AB
1746-C9 Chassis Interconnect Cable AB
1746-FIO4I Fast Analog Input/Output Module AB
1746-FIO4V Fast Analog Input/Output Module AB
1746-HS Motion Controller Module AB
1746-HSCE High Speed Counter Module AB
1746-HSCE2 Multi-Channel High Speed Counter Module AB
1746-HSRV Servo Control Module AB
1746-HSTP1 Stepper Control Module AB
1746-HT Termination Panel AB
1746-IA16 120V AC Input Module AB
1746-IA4 120V AC Input Module AB
1746-IA8 120V AC Input Module AB
1746-IB16 Current Sinking DC Input Module AB
1746-IB32 Current Sinking DC Input Module AB
1746-IB8 Current Sinking DC Input Module AB
1746-IC16 Current Sinking DC Input Module AB
1746-IG16 Current Sourcing TTL Input Module AB
1746-IH16 Current Sinking DC Input Module AB
1746-IM16 240V AC Input Module AB
1746-IM4 240V AC Input Module AB
1746-IM8 240V AC Input Module AB
1746-IN16 24V AC/DC Input Module AB
1746-INT4 Thermocouple Input Module AB
1746-IO12 Combination Input/Output Module AB
1746-IO4 Combination Input/Output Module AB
1746-IO8 Combination Input/Output Module AB
1746-ITB16 Fast Response DC Sinking Input Module AB
1746-ITV16 Fast Response DC Sourcing Input Module AB
1746-IV16 Current Sourcing DC Input Module AB
1746-IV32 Current Sourcing DC Input Module AB
The use of the product:
1.parking, automobile,
2.transmission and distribution.
3.combustion control systems,
Product's advantages:
1.Experienced technichal support team.
2. new and original
3.1 year warranty
Our advantages:
1. Improve efficiency
2.2000+ suppliers with us, we could help you to get any components
which is difficult to get.
3.Risk-free guarantee, 60 days refund. If the item you purchase
from our store are not of perfected quality, simply return them to
us for replacement or refund.
Frequently Asked Questions:
1.Q: Are the P/N latest?
A: Yes. All P/N are latest and date codes are in 2016 or 2017.
2.Q:What about your lead time ?
A: We have many itmes in stock , 3-5 days you will receive it .
3.Q: Can you provide discount ?
A: Yes, we are glad to offer you dicount if you order more than 1
piece .
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
