Allen Bradley Modules 1746-FIO4V 1746FIO4V AB 1746 FIO4V Analog In/Out New Performance great

Allen Bradley Modules 1746-FIO4V 1746FIO4V AB 1746 FIO4V Analog In/Out New Performance great

Product Description:

Two serial connectors to simplify RS-485 multi-dropping and host communications Several analog or digital command interfaces: Indexing (absolute with the Homing feature, incremental, or
registration)10 Volt analog interface—position, velocity, or torque control Presets (from one to eight binary inputs)—torque or velocity control Quadrature encoder digital interface—electronic gearing position follower Step/Direction digital interface—position control CW/CCW (step up/step down) interfaceposition control Operating mode override—alternate movement interface Host command digital interface The ULTRA 100/200 drives host command protocol provides optional drive configuration using the drive serial communications interface. This powerful feature allows your controller to access all of the drive digital controls using sequences of ASCII characters. The protocol includes error checking to
ensure the integrity of the transmitted commands. In installations that have multiple axes, up to 32 ULTRA 100/200 drives can be addressed by a host computer. These drives communicate with the host
computer using a four-wire RS-485 serial interface. The host command protocol includes specific drive addressing, which allows the host to communicate with all the connected drives concurrently.

Related Product Recommendation:

Product's Character:

When the drive mounted HIM is supplied, it will be connected as Adapter 1 (see Adapter in Chapter 2) and visible from the front of the drive. The HIM can be divided into two sections; Display Panel and Control Panel. The Display Panel provides a means of programming the drive and viewing the various
operating parameters. The Control Panel allows different drive functions to be controlled. Refer to Figure and the sections that follow for a description of the panels.Important: The operation of some HIM functions will depend upon drive parameter settings. The default parameter values allow full HIM
functionality.HIM OPERATION When power is first applied to the drive, the HIM will cycle through a series of displays. These displays will show drive name, HIM ID number and communication status. Upon
completion, the Status Display will be shown. This display shows the current status of the drive (i.e. “Stopped,”“Running,” etc.) or any faults that may be present (“Serial Fault,” etc.). If the HIM software is Series A version3.00

1747-ACN15 ControlNet Adapter Module AB
1747-ACNR15 ControlNet Adapter Module AB
1747-AIC Isolated Link Coupler AB
1747-ASB Remote I/O Adapter AB
1747-BSN Backup Remote I/O Scanner AB
1747-C11-A Programmer Cable AB
1747-DCM 1747-DCM A Direct Communication Module AB
1747-DPS2 Configurable Port Splitter AB
1747-FC Ferrite Collar AB
1747-KE Interface Module AB
1747-KFC15 ControlNet Messaging Module AB
1747-L20A/A 1747-L20A Processor Unit - Series A AB
1747-L20A/B 1747-L20A Processor Unit - Series B AB
1747-L20A/C 1747-L20A Processor Unit - Series C AB
1747-L20B/B 1747-L20B Processor Unit - Series B AB
1747-L20C/B 1747-L20C Processor Unit - Series B AB
1747-L20C/C 1747-L20C Processor Unit - Series C AB
1747-L30A/B 1747-L30A Processor Unit - Series B AB
1747-L30B/B 1747-L30B Processor Unit - Series B AB
1747-L30C/B 1747-L30C Processor Unit - Series B AB
1747-L40A/B 1747-L40A Processor Unit - Series B AB
1747-L40A/C 1747-L40A Processor Unit - Series C AB
1747-L40B/B 1747-L40B Processor Unit - Series B AB
1747-L40L 1747-L40L Processor Unit - Series A AB
1747-L511 SLC 5/01 SLC 5/01 Controller AB
1747-L511/A SLC 5/01 SLC 5/01 Controller AB
1747-L511/B SLC 5/01 SLC 5/01 Controller AB
1747-L514/A SLC 5/01 SLC 5/01 Controller AB
1747-L514/B SLC 5/01 SLC 5/01 Controller AB
1747-L524/C SLC 5/02 SLC 5/02 Controller AB

1747-L531/D SLC 5/03 SLC 5/03 Control Processor AB
1747-L531/E SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/A SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/B SLC 5/03 SLC 5/03 Control Processor AB

The use of the product:

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.