ABB Module SNAT617CHC SNAT 617 CHC ABB SNAT617CHC BROWN BOVERI New
and original
Product Description:
Input currents which exceed the measuring range cause an overflow
error message. If the measured value is below the range, an
underflow error message is generated. The input impedance is ca.
330 W. The current input has a self-protecting mechanism. If the
input current gets too high, the shunt is switched off and the
value for range overflow is generated. About every second, the unit
tries
to switch on the shunt again. In this way the correct measurement
will succeed after the current has reached a normal value again.
The trigger of the self-protecting mechanism is displayed by the
red LED Ovl. as long as the overload is present. In the PLC system
an error message is then stored (FK4,
error number 4). The open-circuit monitoring begins below ca. 3 mA.
The value of the range underflow is stored. If the open-circuit
monitoring is configured, the open-circuit event is displayed by
the red LED Ovl. as long as it is present. In the PLC system an
error message is stored
Related Product Recommendation:
| HP03 | SPNPM22 | 07KT94 |
| HP21 | TC520 3BSE001449R1 | PM30 |
| HS01 | TP830 3BSE018114R1 | PMM44 |
| HS11 | TPC-1570H 3BHE031734R1011 | POT31 |
| HV01 | TU830V1 | POT32 |
| HV12 | VV01 VV 01 | POT71 |
| HW81 | VV11 VV 11 | POT72 |
| HW91 | WT98 07KT98 | PVM01 |
| LL01 | XI16E1 1SBP260100R1001 | PVM02 |
| AV02 | XM02 XM 02 | PVM03 |
| AV05 | XM03 XM 03 | PVM04 |
| AV06 | XM06B5 1SBP260103R1001 | PVM31 |
| AV08 | XN03 XN 03 | RK01 |
| AV31 | XN05 XN 05 | RK04 RK04 |
| AV41 | XN06 XN 06 | RL01 |
| AV42 | XO08R1 XOO8R1-B04 1SBP260101R1001 | RMG19 |
| AV43 | XP01 XP 01 | SL04 SL04 |
| AV97 | XU03 XU 03 | SL11 |
| AV98 | XU04 XU 04 | SL12 |
| AW01 | XV371A | SL13 |
| AW02 | YPH107A 3ASD573001A9 | SL14 SL14 |
| AW03 | YPH108B/SPC | SS01 SS01 |
| AW05 | YPK113A 5761857-4A | SS11 SS11 |
| DAI01 | YPQ110A 3ASD573001A5 | SS15 SS15 |
| DAI04 | YPQ112A | SS6 SS16 |
| DAI05 | YT296000-MZ YXU149B YXU 149B | SS21 SS21 |
| DAO01 | YXO116 4890024-LC | PBK10 |
Product's Character:
The 8 digital inputs/outputs are arranged in one group.The group as
a whole is electrically isolated from the rest of the device.The
inputs/outputs can be used individually as input, output or
re-readable output.If the terminals are used as digital inputs, the
input signal delay can be configured to 7 ms (default) or to 1 ms
(see "System technology"). If the terminals are used as digital
outputs, the output
signals "1" are individually monitored by the re-readable input. If
the output status is wrong, an overall error message is generated
for the involved output group.The error is displayed by the red LED
Ovl. and by error flags of the PLC then. The error could have been
caused by overload, short-circuit or missing supply voltage
UP5/ZP5. The technical specifications of the outputs are the same
as with the other digital outputs.
DC 371a GJR2 237100 R1, GJR2237100R0001 DC 371a Group Control
Module ABB
DC 372a GRJ2 238200R1 , GRJ2238200R0001 Step Control Module ABB
DC 375a GJR2 304400 R1, GJR2304400R0001 DC375a Operating Mode
Controller Module ABB
DC 722F A0 3BDH000372R0001 Digital Input/Output Module ABB
DCO 01 0369666 DCO01 Serial Interface Module ABB
DCP 02 P 37211-4-0369654 DCP 02 CPU Module ABB
DCP 10 P37211-4-0338701 DCP10 CPU Module ABB
DCS800-DEMOCASE Field Kit ABB
DCS800-EP1-0020-05 Module Drive ABB
DCS800-EP1-0045-05 Module Drive ABB
DCS800-EP1-0065-05 Module Drive ABB
DCS800-EP1-0090-05 Module Drive ABB
DCS800-EP1-0125-05 Module Drive ABB
DCS800-EP1-0180-05 Module Drive ABB
DCS800-EP1-0230-05 Module Drive ABB
DCS800-EP1-0315-05 Module Drive ABB
DCS800-EP1-0405-05 Module Drive ABB
DCS800-EP1-0470-05 Module Drive ABB
DCS800-EP1-0610-05 Module Drive ABB
DCS800-EP2-0020-05 Module Drive ABB
DCS800-EP2-0045-05 Module Drive ABB
DCS800-EP2-0065-05 DCS800-EP2-0065-05 ABB
DCS800-EP2-0090-05 Module Drive ABB
DCS800-EP2-0125-05 Module Drive ABB
DCS800-EP2-0180-05 Module Drive ABB
DCS800-EP2-0230-05 Module Drive ABB
DCS800-EP2-0315-05 Module Drive ABB
DCS800-EP2-0405-05 Module Drive ABB
DCS800-EP2-0470-05 Module Drive ABB
DCS800-EP2-0610-05 Module Drive ABB
DCS800-PAN Field Kit ABB
DCS800-S01-0020-05 Module Drive ABB
DCS800-S01-0045-05 Module Drive ABB
DCS800-S01-0065-05 Module Drive ABB
DCS800-S01-0090-05 Module Drive ABB
DCS800-S01-0125-05 Module Drive ABB
DCS800-S01-0180-05 Module Drive ABB
DCS800-S01-0230-05 Module Drive ABB
DCS800-S01-0290-06 Module Drive ABB
The use of the product:
1.tobacco,
2.oil and gas,
3. petrochemical,
Product's advantages:
1. Provides the lowest Total Cost of Ownership (TCO)
2. new and original
3.1 year warranty
Our advantages:
1.Avoid unplanned downtime
2.emission reduction
3.Avoid unplanned downtime
Frequently Asked Questions:
1. Q:What about your shipping terms ?
A: We can ship by DHL,UPS,FEDEX,ARAMAX,TNT,and so on
2. Q: Could Moore provide technology support?
A: We're in this field more than 12 years. If there's any problem,
please contact with us,we'll provide suggestion from our engineer
to help you solve problem.
3. Q: Does Moore keeps goods in stock or only trading?
A: We have large warehouse for goods. Keep lots of goods in
warehouse, so could promise fast delivery.
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
