10 Pairs KRONE LSA Disconnection Module with Color Label ABS or PBT
Quick Detail:
1. Material: PBT or ABS(UL94V-0)
2. Contact: Phosphor Bronze
3. Silver Plating: 0.5 um1.25 um5 um
4. Can be installed on krone type stainless steel back mount frames
5. Available with 50pair block tag and 100pair block tag.
6. for mounting on MDF,racks,profile bracket,indoor and outdoor
distribution box,cross connection cabinets.
Specification:
1. Environment condition: -5-40 degree Celsius Relative humidity
<85% (+30 degree Celsius)Atmospheric pressure: 70-106KPa
2. The modules are compatible with KRONE LSA-PLUS modules.The
design ofcontacts basing on the principle of airtight contacting
makes acompletely reliable connection between the contacts and
wires
3. Size (H x W x D): 75mm x 21.5mm x 40.5mm (5 Pairs)
4. ulling-out force: tin bronze and silver plating (20-40 uinch),
pulling-out force not less than 25N
5. Internal diameter of connection wire: 0.4-0.6 mm
6. The performance of anti-burn: PBT UL94V-0or anti-burn ABS
UL94V-0,Combustibility achieved GB/T 5169.7-1985 standard
7. Insulated resistance: under standard atmospheric pressure
,Insulatedresistance no less than 1,000M ohm between the two
disjunct connections
8. Intermediate resistance between the reed terminators: no more
than 7mohm between intermediate reed under the standard examination
condition
9. Intermediate resistance: no more than 3m ohm under standard
examination condition
10. Dielectric strength: according to industry standard
12 . Type: disconnection type
13. Life: durability 200 cycles
Applications:
High speed LAN and WAN systems,used to connect the Telecom and Data
wires with punch down tools.
Specifications :
| Mechanical Performance | Insertion force : 40~75N |
| Pull Out Force : F≥25N(axial) F≥7.5N(radial) |
| IDC Life : 200 times(20-26 AWG Solid wire) minimum |
| Copper Conductor Diameter: Φ0.4~Φ0.8(mm) |
| Environment Characteristic | Storage Tempreture: 40 to 70°C |
| Operating Temperature : 10 to 60°C |
| Relative Humidity: 95%, noncondition |
| Electrical Performance | Insulation resistance: 1000 Mohms minimum |
| Contact resistance :7 mohms maximum |
Dielectric intensity: AC 1000 Vrms 50Hz or 60Hz in 60s
|
Why you choose us:
1. 30 years manufactory experience
2. OEM/ODM available
3. Steady product quality
4. Strict quality control
5. Strictly conform to CE,ROHS,UL certificate
6. Quick delivery time
Disconnection Contact:
S2 Disconnection modules use a two piece contact (normally closed),
with a convenient disconnection feature. By inserting a disconnect
plug into a wire pair, you can temporarily or permanently
disconnect the circuit. A test Cord can be inserted into a pair to
test each side (look both ways) of the circuit independently. This
greayly accelerates fault identification. The centre contact point
can also be used for monitoring or over voltage protection.
Connection Contact:
Connection Modules have a one piece contact providing a continuous
link between permanent wiring and jumper wiring, giving provision
for monitoring access and overvoltage protection.
Switching Contact:
Switching Modules house individual contacts and hence the circuits
are disconnected when
idle. By inserting plugs, cords or over voltage protection, the
circuits can be connected when
necessary.
