48 Port Rack Mount Patch Panel 2U 19'' UTP Patch Panel Cat5e 110 IDC RoHS Compliant

48 Ports 2U 19'' Cat5e 110-IDC UTP Patch Panel

PRODUCT FACTS

A patch panel is a connecting hardware system (typically rackmounted) that facilitates cable termination and cabling administration using patch cords. One shorter patch cord will plug into the front side, whereas the back holds the connection of a much longer and more permanent cable. The assembly of hardware is arranges so that a number of circuits, usually of the same or similar type, appear on jacks for monitoring, interconnecting, and testing circuits in a convenient, flexible manner.

Patch panels offer the convenience of allowing technicians to quickly change the path of select signals, without the expense of dedicated switching equipment. This was first used by early telephone exchanges, where the telephone switchboard (a massive array of patch panels) and a large room full of telephone operators running it was ubiquitous.

SPECIFICATION

• Lead-free & RoHS compliant, certified by TUV.

• Meet the ANSI/TIA-568-C.2, ISO/IEC 11801 2nd edition and CENELEC EN 50173-1

cabling requirements for Category 5e performance.
• Comply with requirements of ANSI/TIA-1096-A (FCC Part 68) and reliability requirements

of IEC 60603-7 series for RJ45 8-way connector.

ELECTRICAL

• Voltage proof: 1000V DC or AC peak, contact-to contact.

• Current-carrying capacity: 0.75 Amps minimum

• Contact resistance: 20 MΩ maximum

• Insulation resistance: 500 MΩ minimum at 100V DC or 100 MΩ minimum at 500V DC

• Input to output resistance: 200 MΩ maximum

• DC resistance: 0.2 ohm maximum

MECHANICAL

• Mechanical operation: 750 cycles minimum for insertion / withdrawal with modular plug

20 cycles minimum for cable re-termination

• Effectiveness of connector coupling devices: 50N (11 lbf) for 60s±5s

ENVIRONMENTAL

• Temperature: -10℃~60℃
• Humidity: 10%~90%RH

Over 30 Years of Experience
Cixi Anshi Communication Equipment has been specializing in jacks and connectors since 1986. We offer you more than 200 specifications in 10 categories, including fiber-optic distribution trays and splice closures, drop wire connectors, Cat5E and Cat6E patch cables, internet connectors, and distribution boxes. About 60% of our products are exported to Southeast Asia, Europe, the Middle East, Africa and the US.

One New Product Every Month
Our six R&D staff members use advanced testing equipment from the US. They use computer software such as AutoCAD, Pro/E, 3D MAX and Photoshop. They also develop one new product every month to meet your requirements.

OEM/ODM Orders Accepted
Now, we have more than 100 staff members and 20 of them are technicians at our 4,800 sqm factory. We have two production lines dedicated to processing your OEM/ODM orders, thus, we produce $200,000 worth of components every month.

Three Sections to Control Quality
Following ISO 9001:2000 guidelines, our quality control department includes QC, QE and QA sections. QA staff members check the quality of all raw and processed materials, while QE personnel are responsible for the related documents. QC staff members handle your requests and quality statistics, and make the corresponding improvements. We use materials from South Korea, the US and Taiwan to ensure quality. You can have confidence in ordering our CE-approved products.

Contact Us Today
Call us today for more information.