It is suitable for tension, compression, bending, shearing,
peeling, tearing and other tests by adding different test fixture
for metal and non-metal materials. It is widely used in inspection
department, engineering area, laboratories, universities and
institutes for material properties research and quality control.
Features:
1. It has three parts: Host & oil source &measurement control
system
2. Automatic rise, down, test and stop
3. Deepen jaw seat can prevent trumpet-shaped deformation as
non-uniform stress in the test, can improve the soundness and life,
make holding more firm and smooth
4. Between the jaw seat and jaw plate added wear-resisting backing
board, protect the jaw seat and card plate, making the jaw seat
more flexible
5. Between the host base and screw using the cone bearing which
make screw rotation more stable and reliable, while solved the gap
influence in the test progress
6. The middle cross bar adopt the adjustable gap nut mechanism,
eliminated the gap and improve the measuring performance
7. All inclusive type host designed to ensure that its super
stiffness to resist loads trace deformation
Standards
ISO75001, ASTM A370, ASTM E4, ASTM E8 and BSEN standards
Main specifications
| Model | WAW-100H | WAW-300H | WAW-600H | WAW-1000H | WAW-1500H | WAW-2000H |
| structure | Four column Two ball screw |
| Control mode | constant stress, deformation, displacement, three closed loop
control |
| Max. Load | 100kN | 300kN | 600kN | 1000kN | 1500kN | 2000kN |
| Load range | 2%~100%FS |
| Force resolution | 1/300000 |
| Load accuracy | ≤±1% |
| Test force resolution value | 0.01kN |
| Deformation Measurement Range | 2% ~ 100% of extensometer measurement range |
| Deformation indication error | ± 0.5%of indicating value |
| Deformation resolution | 0.001mm |
| Displacement Indication Error | 1%of indicating value |
| Displacement Resolution | 0.01mm |
| Clamping Method | Hydraulic clamping |
| Control range of stress rate | 1MP/S-60MP/S
|
| Adjust range of test strain rate | 0.00025/S-0.0025/S |
| Control range of displacement rate: | 0.5mm/min-50mm/min
|
| Gantry adjust speed | 150mm/min |
| Max piston stoke | 250mm |
| Max. Tensile Test Space | 650mm |
| Max.Compression Test Space | 500 |
| Round Sample Clamping Diameter | Φ6-Φ13mm | Φ6-Φ26mm | Φ13-Φ26mm | Φ13-Φ40mm | Φ13-Φ60mm | Φ20-Φ80mm |
| Flat Sample Clamping Diameter | 0-15mm | 0-15mm | 0-15mm | 0-30mm | 0-40mm | 0-60mm |
Clamping width of flat smple | 70mm | 70mm | 75mm | 75mm |
| Pressure Plate Size | Φ160/204x204(optional) |
| Bending Test Branch Roller Width | 140mm |
| Roller distance of bending | 600mm |
| Voltage | 380V/50Hz/3Phase(can be customized) |
| Overall Dimension(LxWxH) | 660×500×1800 | 740×580×2050 | 820×660×2250 |
