Single Column Computer Control Tensile Machine is a new material testing machine that combined with the
electronic technology and mechanical transmission, it has accurate
load speed, range of force measurement, Has high accuracy and
sensitivity for the load, displacement measurement and control,
This machine is simple to operate, simple structure, it can be
directly placed on the testing table for test, especially suitable
for controlling quality in production line This series of machine
is mainly applied to test the non-metallic and metallic materials
which the load is less than 5KN.
Corresponding standard:
GB/T16491-1996 electronic universal testing machine
Applicable industry:
It is widely used in wire and cable, hardware, electronic and
electrical equipment, packaging, printing, medical equipment, auto
parts, textiles and leather, clothing, shoes, rubber and plastic
products, colleges and universities; research laboratories;
inspection arbitration, technical supervision departments and many
other industries, it is the basic equipment for quality management
and physical tested
Technical parameters:
A. Maximum Load: 5KN
B. Capacity choice: 1KN,2KN,5KN option.(from U.S.A.)
C,accuracy of load measurement: the load cell + HZ-2000 screen ±
0.5% (full range of 5% -100%)
D. Units:Kg,Lb,N
E. Resolution: 1 / 50000
F,displacement resolution: 0.001mm
G.power system: AC motor,deceleration device(from Italy)
H. control system:testing speed 50~300 mm/min with stepless speed
and 5 fixed-speed
(50,100,200,250,300)or the needs of customer.
I,Data sampling frequency:200times/sec
J..displacement: 1200mm
K. Safety devices: overload, emergency stop devices, limited
devices of displacement,leak current protection device
L. Machine has function of printing.
Can store 10 testing results and auto-calculate its average,
auto-grab maximum force and the force at break.
Display: HZ-2000 dark blue LCD display, membrane touch keys, with
the following functions.
single test, 10-point statistics manually and automatically
calculate its average and break values;
Multi-unit automatically exchange such as kgf, Lbf, N;
function of free to take point;
With multi-calibration function;
Auto printing function;
Using 24-bit AD acquisition, resolution 1 / 200000;
Decimal digits 0 to 4 arbitrary choice;
Starting up using password protection feature, which can
effectively prevent the non-operators to use
ratio of Breakpoint from 0 ~ 99%, which the user can set according
to different materials to stop the machine
Overload protection function can be set, effectively preventing
machine from overload;
O,power supply: AC 220V single-phase
P,power:400W
Q,machine size: about 600x450x1800mm(length * width * height)
R,weight :70kg
Original configuration
A group of tensile fixture
Main functions:
This Single Column Computer Control Tensile Machine for composite materials can be test all the material in tensile,
compression, bending, shear, peel, tear, two-point extended (need
add extensometer) and others for control products quality. Such as
textile, rubber, plastics, synthetic leather, tape, adhesive,
plastic film, composite materials, electronics, metals and other
materials.
Main feature:
1. the surface of appearance using electrostatic spray, simple and
generous, multi-functions and economy.
2. digital force displayed by LCD , discernible tension or
pressure, LCD display clearly
3. Three kinds of units: N-Kgf-Lbf option or automatically
exchange;
4. LCD with backlight can be used in low-light environments
5. Single measurement, it can record the max force of tension and
compression in both directions, automatic or manual cleared to
zero.
6.The system would shut down if overload or over-trip
7. Structure of single-column is beautiful, sophisticated and
economy.
