| 1 | Model No. | Keel Roll Forming Machine |
| 2 | Thickness | 0.3-0.8mm |
| 3 | Coli material | GI |
| 4 | The bearing capacity of manual decoiler | 6.5 tons |
| 5 | shaft material | 45#steel |
| 6 | Out diameter | Customized |
| 7 | numbers of forming steps | Customized |
| 8 | transmission | chain transmission |
| 9 | Forming speed | 10-15m/min |
| 10 | main motor power | 3kw |
| 11 | voltage | 380V50HZ Three-phase or as required |
| 12 | dimension | 5*1.3*1.3 |
| 13 | cutting | hydraulic cutting |
| 14 | blade material | Cr12 steel with quenched treated 60-62°c |
| 15 | control system | PLC(Delta) |
| 16 | length tolerance | ±1mm |
| 17 | spare parts | 1 easy demaged parts:conk 2pcs, fuse-link 4pcs 2 rubber mat: 1 pcs 3 bolt spanner: 1 pcs |
| 18 | The whole line including: Manual decoiler, roll forming machine,
hydraulic station, hydraulic cutter, PLC control system, run-out table. |
Decoiler:
Usage: It is used to support the steel coil and uncoil it in a
turntable way.
Inner diameter:350-450mm
Outer diameter:450mm
Coil width:300mm
Capacity:1.5T
Hydraulic oil pump
Advanced hydraulic system from Taiwan
Usage: It is used to provide power for cutting devices.
Power: 3kw
PLC control station
Usage: Automatic length and quantity measurement.
Screen: touch screen
Frequency:Delta
PLC control
PLC:Delta
Run out table
1 set with 3 meter’s long.
A: - What service can you provide before order?
- About the pre-sale service. We provide you answers of all your
questions on our machines, such as technical parameter,
price, payment terms, ect. If you wanna visit our factory and check
the machines, we also can send you invitation letter and
give you our warmest welcome.
B: - Can you finish the machine during the delivery time?
- We will finish the machine in time according to determined lead
time.
C: - Can you provide some spare parts?
- Yes, of course. The quick-wear parts are sent to you together
with the machine.
D: - What is the after- sale service?
- About the after-sales service. We can send technician to your
country to fix the machine. The buyer should
bear all the cost including: visa, Roundtrip ticket and suitable
accommodation, also buyer should pay the salary100USD/day.
The warranty is one year. And we will provide the technical support
for the whole life. It is free to maintain the machine the first
year after buying, including changing the main components. The
first year hence, you will pay
for our technician $100 per day to maintain the machine. And the
components are not free, if you need to get
it from us.
E: - Any other service?
- We can manufacture, design, installation and debug various roll
forming machines including standard and customized machines.
It is free to assemble machine and train your works, but the buyer
should pay for the round-trip airplane ticket,
and arrange accommodation during that time.
