Equipment summary:
Textile tensile testing machine with the electronic technology is a new material testing machine that combined with the electronic
technology and mechanical transmission. It has accurate load speed,
high accuracy and sensitivity for the load which is less than 1kN.
It can test range of force measurement, displacement and control.
This machine has single-space structure, operational space at the
bottom.
It is mainly applied to test non-metallic and metallic material.
And it can also test stress,strain, control mode of
displacement,calculated max force, tensile strength, bending
strength, compressive strength, elastic modulus, rate of
elongation, yield strength and others .
Main function:
Textile tensile testing machine with the electronic technology can be applied to test lots of materials in tension, compression,
tear, peel ( 90 degrees and 180 degrees) and other mechanical test,
such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP,
ABS, EVA, PU, aluminum-plastic pipe, composite materials,
waterproof materials, fibers, textiles, wire and cable, paper, gold
foil, ribbons,thread, spring, wood,medicine packaging materials,
tapes etc.
Applicable industry:
Textile tensile testing machine with the electronic technology is widely used in wire and cable, hardware, electronic and
electrical equipment, packaging, printing, medical equipment, auto
parts, textiles and leather, clothing, shoes, rubber and plastic
products, colleges and universities; research laboratories;
inspection arbitration, technical supervision departments and many
other industries, it is the basic equipment for quality management
and physical tested.
Technical parameters:
| model | Textile tensile testing machine with the electronic technology |
| Maximum load | 50N,100N,200N, 500N, 1KN,2KN(optional ) |
| Accurate grade | 1grade / 0.5 grade |
| Effective measuring range | Force from 0.2% to 100% / from 0.4% to 100% |
| Measuring accuracy | the value ±1% / the value ±0.5% |
| Tester resolution | Max load: 1/200000, constant the resolution |
| Load sensor | Basic configuration sensor max load: one |
| Effective tensile stroke | 400, 500mm (can be increased the tensile space according to
customers requirement ) |
| Testing speed | From 0.001 to 500mm/min |
| Accruacy of displacement measurement | Tolerance:±0.5% / tolerance: ±0.2% |
| Safety | Electronic-limit protection |
| Testing platform moving device | Fast /slow( two speeds to control ),can jog |
| Return Back | Manual or automatic operation, After the test, the moving iron
return to initial position with the highest speed by manual or
automatic operation |
| Overload protection | Overload 10%, automatic protection |
| fixture | A set of tensile clamp |
| Machine dimension | 450*580*1350 mm (L*W*H) |
| Motor | hongyuan AC servo motor and drive |
| Power supply | 220V , 50HZ or according to the requirement |
| Power | 0.4KW ( depending on different demand of force,using different
motor) |
| weight | About 160 Kg |
