Wire Rope Pulling Portable Gas Powered Winch 1 Ton With Gasoline
Engine
Winch Introduction
A winch is a mechanical device that is used to pull in (wind up) or
let out (wind out) or otherwise adjust the "tension" of a rope or
wire rope (also called "cable" or "wire cable"). In its simplest
form it consists of a spool and attached crank. In larger forms,
winches stand at the heart of machines as diverse as tow trucks,
steam shovels and elevators. The spool can also be called the winch
drum. More elaborate designs have gear assemblies and can be
powered by electric, hydraulic, pneumatic or internal combustion
drives. Some may include a solenoid brake and/or a mechanical brake
or ratchet and pawl device that prevents it from unwinding unless
the pawl is retracted.
Application
Powered winches are the construction tools of erecting electric
circuits of high pressure electric transmission in the sky and
laying electrical cables underground.
They can complete the tasks of heavy-lifting and dragging such as
erecting the wire.
Testified by the experiments and practical uses, they have
reasonable structure, small volume, light weight, strong power,
nimble operation and convient transporting.
Based on so many advantages, this Powered winch is popular with the
electric workers.
Features
Reasonable structure,Small volume,Light weight,Strong power,Nimble operation,Convenient transporting.
Operation methods
Before turning on the machine, you must turn on the clutch first
and put the racker for crosspiece - changing in the zero position.
When moving the crosspiece, you should be quick. Otherwise the
brake won’t work well. When turning on the machine, you shouldn’t
work too fiercely.
When changing the crosspiece position, you must turn on the clutch.
Otherwise the gear will be damaged. After that, you should check
whether the changing job is well done. Make sure you haven’t
changed two crosspieces in one time.
If there is any difficulty during the process of changing
crosspiece position, you shouldn’t try to complete the job
forcefully. Instead you should use the hand installment to help you
complete the job. Concrete procedure: using the spanner to move the
hand installment to a position with a certain angle, then you can
change the crosspiece position smoothly.
Technical Data
| Model Type | Power | Gear | Pulling Force(KN) | Pulling Speed(m/min) |
| JJM-1Q | gasoline winch 5.5HP | Slow | 6 | 0.8 |
| Quick | 18 | 0.6 |
| Reverse | 15 | no lifting |
