DHY-401 Four Function In One Multi-function Busbar Processing
Machine
Features
Model: DHY-401; This is a combination of a number of functions the
body of professional design, perfect to avoid consideration of
human waste, that is, provincial working hours, consistent with
established operating procedures for personnel engaged in handy,
resulting in high efficiency, high quality perfect work;
the form, appearance, easy to move the surface paint and rust
treatment by phosphoric acid skin mold, wear-resistant impact;
Three position valve guide precision and convenient operation
hydraulic pump with hydraulic table shows the working pressure to
avoid
Avoid overloading,
Foot switch operation device, easy to use
environmental surface treatment table, after grinding and chrome
desk, showing accurate and stable table;
affixed with 15cm of steel rule, can work up to standard size
parameters;
hand adjustable board seat, for long and short size standard,
unified control practices;
security firm foot switch to control the import and return to oil;
focus on the design of copper scrap scrap bags and opened his mouth
and out the mouth of slide type can be cut, wearing copper scrap
sinks article, but not filled with clutter everywhere
Four in one bus machine DHY-401
Features:
cutting, punching, bending flat stand, the machine and high
flexibility, small size and strong function, high productivity and
efficiency. Is to produce a large electric control box and
transmission and distribution construction works on site an
essential tool
Standard equipment:
Electric hydraulic pump, cutting, punching, bending flat, vertical
bending tools;
Hydraulic tool specifications:
Cutting Tools CWC-150 copper width 150mm / Thickness 12mm (without
side flat copper flat) cut row machine output: 20ton;
CH-70 hole punching machine tool output: 35 tons; iron copper 12mm
thick 10mm thick 110mm deep throat
Die four groups: aperture 3 / 8 "(10.5mm), 1 / 2" (13.8mm), 5 / 8
"(17mm), 3 / 4" (20.5mm); reprovision ¢ 7mm, ¢ 9mm
Li, Ping Tool CB-125D flat curved bend, two features stand bent,
aluminum, copper width 40,50,60,80,100,125 mm thickness
4,5,6,8,10,12.5 mm.
Technical Data
| Normal Operating Pressure(Psi) | 1000,63MPa |
| Power Souce(12V) | 750W/220V/50Hz |
| Output of cutting machine(KN) | 350 |
| Cutting Range(mm) | copper and aluminum≤ 200*12 |
| Output of hole punching machine(KN) | 350 |
| Hole punching range(mm) | copper 12mm,steel 10mm,aluminum 14mm |
| Punch Standard Mould(mm) | 10.5,13.8,17,20.5 |
| Output of bending machine | 63Mpa |
| Bending Range | stand bent, aluminum, copper width 40,50,60,80,100,125 mm thickness
4,5,6,8,10,12.5 mm.
|
