Small and Simple Mechanical Vibration Test Machine with Vertical
Testing
Principle Introduction
Our mechanical vibration table has three testing functions, namely
vibration test under particular frequency, frequency sweep test,
and multi-stage random test. These three test functions enable
users to perform various tests on their products, such as vibration
function test, vibration endurance test, package transportation
test, resonance search, resonance dwell, stress screening and
fatigue test.
Mode of vibration test under particular frequency: After setting a
certain test frequency point, amplitude and test time, the
vibration tester can carry out test as per set conditions until the
end of test time, and its operating mode is shown in Figure a.
Besides, test can be conducted unless the test frequency and
amplitude are within the performance curve of the vibration tester
table.
Frequency sweep test mode: After setting a start frequency, stop
frequency, test amplitude and frequency sweep time, the vibration
tester will gradually increase or decrease the vibration frequency
from the start frequency to the stop frequency, and the frequency
sweep speed is determined by the frequency sweep time. Its
operating mode is shown in Figure b. Besides, test can be conducted
unless the test frequency and amplitude are within the performance
curve of the vibration tester table.
Multi-stage random test mode: After respectively setting multiple
(at most ten stages) test frequencies and test durations (each
stage can be deemed as a vibration test under particular
frequency), and a certain amplitude, the vibration tester can carry
out test in the set order. Its operating mode is shown in Figure c.
Similarly, test can be conducted unless the test frequency and
amplitude are within the performance curve of the vibration tester
table.
Features
1, Using centrifugal excitation method, low mechanical noise.
2, Using synchronous reverse movement, excellent table evenness.
3, Stepless amplitude adjustment, meet different product test
requirements.
4, Use-friendly operation control interface.
5, Fixed with shock absorption bags without special foundation.
Specifications
| Model | RV3000 |
| Table Size(L×W) | 600 x 500mm |
| Freq. Range(Hz) | 5--100 Hz |
| Disp. (mmp-p) | 0—3 p～p |
| Acc. Range | 0--11 G |
| Max. Payload(kg) | 130 kg |
| Wave Form | Sine pulse |
| Vibration Direction | Vertical |
| Power Supply | AC 220V /50Hz |
| Machine Dimension | 765*525*690mm |
| Machine Weight | 250kg |
FAQ
1. Q: What is your warranty ?
- 12 months product warranty.Free components will be provided if any
performance failure occurs within 12 months caused by non-human
damage.
2. Q: How-to vedio provided ?
- Yes, if required, our engineers will record a specialize how-to
video for you.
3. Q: Is the machine made in your own plant ?
- Yes, welcome to visit our plant(factory), also we support OEM and
ODM.
4. Q: What about the quality ?
- Each instruments must be carried out 100% quality examination and
test when shipping and delivery goods.
- All of our machine are strictly according to CE & ISO standards.
Detailed Pictures:
