10 / 100M 2 SFP Uplink Port Ethernet Wireless POE Switch 440mm X 350mm X 45 Mm

Model: LNK-1024

Overview

The 24 -Port unmanaged PoE Switch, with 24 100Mbit RJ45 ports,2 Gigabit Copper/SFP Combo uplink Port, model 24 PORT 10/100M POE SWITCH, reduces equipment and installation costs by delivering data and power over existing Ethernet cables (CAT5 cable)to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras.

Boost office efficiency and reduce network congestion with a total

switching capacity of 8.8Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with the 24 PORT 10/100M POE SWITCH to install non-PoE devices in remote locations.

Features

• 24-Port 10/100Mbps + 2 Gigabit Copper/SFP Combo uplink Port unmanaged PoE Switch
• 24 -Port supply power to PoE Powered Device
• Complies with the IEEE 802.3af standard
• If 12 POE port work only, then complies with IEEE 802.3at standard,25W each port
• Each switch port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet).
• Support MAC address auto-learning and auto-aging
• Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
• High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
• 8.8 Gbps Switching Capacity
• On/Off power switch

Warranty: One Year

Technical Indexes