1-ch 3G/HD-SDI Video with Intercom To Fiber Optic support 1 ch 3G/HD-SDI video + 1 ch BIDI 24-bit digitally encoded
broadcast quality audio + 1 ch BIDI data over one multi-mode or
single-mode optical fiber. These fiber optic transmitter and fiber
optic receiver are typically used in applications for Rental,
Staging, Theater, Stadiums, Theme Parks, Broadcast/Studio, CCTV
audio and Professional AV applications, etc, and are available for
stand-alone or rack-mount installations. FC, ST or SC optical
connectors is optional. 
Plug and Play design ensures adjustment-free installation and
operation, and optical adjustments are never required. LED
indicators are provided to instantly monitor the system operating
status.
Beyondopto Fiber Optic Transmission Systems can transmit audio,
data and ethernet signals, Our Fiber Optic Integrated Platform is A
System Designed By You - For You. No matter how complex your system
is, you just give your request to us, We will give you a
satisfactory solution and design diagram. Specifications Opitcal:
| Wavelength | 1310nm&1470nm~1610nm | | Output Power | -9~-3dBm / -3~+2dBm | | Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode | | Rx sensitivity | -28dBm | | Optical connector | FC,ST,SC (optional) | | Distance | 0~1KM (MM) / 0~80KM (SM) |
| Video | | Number of Channels | 1 BIDI | | Input/output impedance | BNC 75Ω (unbalance) | | Video bandwidth | 5HZ—7.5MHZ | | Standard video input/output voltage | 1.0Vp-p | | Video voltage range | 0.6~2.0Vp-p | | Differential Gain | < ±1.5% | | Differential Phase | < ±1° | | S/N Ratio: | 67dB | | Connecter | BNC |
| Data | | Data protocol | RS232,RS422,RS485,Manchester,BIPHASE data | | Data rate | 0~500 Kbps | | Error rate | < 10-9 | | Connector | Standard terminal lead |
| Audio | | Input/output Impedance | 600ohm(unbalance) | | Max input/output voltage | 3.0Vp-p | | Frequency Response | 10 Hz～29kHz @±3dB | | SNR | > 70dB | | Connector | Standard terminal lead |
| Electrical & Mechanical | | Input Power Requirements: | DC 5V@2A | | Power Adapter: | AC 90V~240V | | Power Consumption: | < 5W | | Stand-Alone Dimensions: | 175mm×154mm×30mm | | Shipping Weight: | (include Transmitter & Receiver ) 1.5kg |
| Environmental | | Operating Temperature: | -20°C ~ +75°C | | Storage Temperature: | -40°C ~ +85°C | | Relative Humidity: | 0% ~ 95% (non-condensing) | | MTBF: | >100,000 hours |
Note:
• The Optical Power Budget data fit Mulit-mode(62.5/125
μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the
optical power budget.
• Optical transmission distance is limited to optical loss of the
fiber and any additional loss introduced by connectors, splices and
patch panels.
• Maximum transmission distance is also limited by fiber bandwidth.
• Power adapter is manufactured by third party and is supplied with
fitted screw-terminal output cables.Power adapter included (for
standalone) US, European, UK or Australian power plug.
• Please feel free to consult factory for any special requirement
and customization. • Due to continuous improvement, all fiber optic transmission
systems and video over fiber product specifications are subject to
change without further notice. |
