CO2 Laser Tube F6 130W For Nonmetal Engraving and Cutting
Product Feature
1. Reliability: discharge raw glass tube is imported from Germany,
the complete glass tube quality is under controlled.
2. Power: compared to common laser tube with same length, power is
40% higher. Max power can be 150w
3. Long Lifespan: catalyst coated discharge tube with processed
electrode, the discharging is more stable, and working life is up
to 10000 hours.
4. Beam: stable cavity structure brings more reliable beam and
better quality, beam mode is up to TEM00.
5. Warranty:free replacement during 300days
Advantage
1. Solved the problem that beam mode changes, power is more stable.
2. Improved the yield, the production quantity is increased,
delivery time is more short.
3. Production engineering and product structure is more mature,
production cost is lower
4. Reliability is better, price is lower .
the specified cleaning method for the transmitting mirror is as
follows
1. When the lens is stained, turn off the laser tube.
2. Use an air blower to blow away dust and dirt on the lens.
3. Use a syringe to spray ethanol on the lens.
4. After the ethanol evaporates, turn the laser tube back on.
5. If the above methods do not work effectively, professionals are
required, who will use a cotton swab dipped in ethanol to clean the
lens in a rotating fashion away from the center, outwards to the
edge.The best method is to protect the windows from contamination.
Parameters
| Model | Length(mm) | Dia(mm) | Rated Power(w) | Max Power(w) | Warranty | Catalyst |
| F6 | 1650±20 | 80±2 | 130w | 150w | 300days | YES |
