SOLAS Marine Dry Battery Lifebuoy Light Position Indication Strobe
Light
1. Overview:
Lifebuoy lights are equipped on the lifebuoys applied for persons
who falling into the water or lifeguards as light signals to
indicates the position.
2. Specification & Main parameter:
1.Battery: Size D, Alkaline Battery
2. Environment temperature: -30℃~65℃
3. Working temperature : -1℃~30℃
4. Working Time: ≥2 hours
5. Working voltage: 6.0V
6.luminous intensity: ≥2 cd
7.luminous Type: Flashing
8.Flash frequency: 50~70/ min
9.Validity: 5 year
10. Size: ¢91×355mm
3. How to work:
When lifebuoy was thrown into the water, Life buoy lights will
automatically fall out of bracket into the water vertically, and it
begins blinking. The Lifebuoy light is completely sealed and
waterproof with the lamp cap 50mm above the water, that ensures the
lamp cap can emit bright and stable flashing light signal
continuously, and can be seen clearly above the range of radians
180. When the lifebuoy leaves the surface of water, the lifebuoy
light is lifted simultaneously and stop flashing, so that it can
effectively conserve battery power and increase working time.
4. Maintenance
4.1 Check surface of Lifebuoy lights are not damaged or corroded,
and check the 1# alkaline battery is intact.
4.2 Check printed label on surface of Lifebuoy lights is within the
validity period, if it exceeds the expiration date which marked on
the label, it should be removed and replaced with a new light to
ensure safety.
4.3 Take out the lifebuoy lights from the lamp holder, the lamp
face upright position, automatically lighting and flashes are
normal, the lamp will automatically turn off flashing when placed
upside down position, that prove the light is in good condition,
can be for normal use, then turns it upside down in the lamp
holder.
4.4 ensure the Lifebuoy Lights is always in the correct position
that during storage.
5 Lifebuoy lights have the following conditions should be stoped
using immediately : Outer case , shade Deformation, cracks,
scratches or serious damage or seals cracks, If there is any
quality problem or other situation make the lifebuoy can not be
used, you should contact with the manufacturer as soon as
possible(Each light have Ex certificate).
6 If there is any explosive gas mixtures, replace or remove the
battery is not be allowed.
