Specifications

100KN RTH Computerized Electronic Creep Testing Equipment

Application:

Creep Testing Equipment is a kind of full electronic creep rupture testing machine to perform routine creep and stress-rupture test., and also can carry on stress relaxation test, high-temperature tensile test in short time, cycle load test (load spectrum test), low cycling test etc.

Test Load

• Max. Load: 30kN, 50kN, 100kN, 200kN
• Effective measuring range: 1%-100%FS;
• Test load accuracy: ≤1%;
• Resolution: 1/60000

High temperature furnace & Temperature-controller

• Working Temp. range: 400°C~1200°C
• Length of effective soaking zone: 150mm
• Furnace pipe & electric furnace size:
• Furnace pipe: φ90mm (Inner Dia.)×400mm (L),
• Furnace: φ300mm (outer Dia,)×420mm (L);
• Furnace life: ≥3000hours (Constant working time less than 1000°C)
• Furnace Temperature accuracy (°C):

1. Measure & Control temperature meter: digital display, sensitivity: 0.1°C;
2. Measure & Control temperature meter: digital display, sensitivity: 0.1°C;
3. Auto compensation error of cold end:≤0.5°C;
4. To be matched freely with thermocouple.
5. Moving speed of lower grip holder
6. Speed range: 0.005~50mm/min;
7. Error: ±0.5%
8. Timing error: ±0.2%

 is one of the top-ranking manufacturers and suppliers of testing technologies worldwide. With many years experience in this filed, we can supply standard and customized solutions for many test, measurement and quality control tasks required in the world of modern materials testing.

The main products from Jinclude hardness testers, universal testing machines, Sample preparation equipment, non-metal materials testing equipment, spectrophotometer, Temperature Chamber, which can used for testing metals, plastics, rubber, textiles, paper, paint, cement, concrete and packaging materials, etc. Their usage is very wide.

Welcome to enquiry and prompt reply will be done by our professional technical and sales person.