F Class IP65 40 Micron Filtered Air Inner Guide Type Pneumatic
Solenoid Valve
The F Class IP65 40 Micron Filtered Air Inner Guide Type Pneumatic
Solenoid Valve power consumption is +/-10%, DC 2.5W AC 2.5VA. The
position and way No. is two-position five-way. The air inlet, air
outlet and exhaust's port size are all G1/8. We can supply the best
as we can and reply you at once.
Some Functions:
1. Wide application.
2. Low power, only 2.5W.
3. Excellent material, precise process, fine shape.
4. Special technology for bore, low friction force, low start
pressure.
5. Quicky directional changing, fast speed.
The Structure Diagram:
Specification of 4V120-06:
| Position and Way No. | Two-position Five-way |
| Working Mdium | 40 Micron Filtered Air |
| Working Pressure | 0.15-0.8MPa |
| Port Size | Air Inlet=Air Outlet=Exhaust=G1/8 |
| Max. Pressure Resistance | 1.0MPa |
| Shortest Excitation Time | 0.05 Second |
| Motion Pattern | Inner Guide Type |
| Voltage Range | 5-50°C |
| Power Consumption | +/-10% |
| Insulation and Protection Class | F Class. IP65 |
| Power Consumption | AC 2.5VA DC 2.5W |
| Wiring Form | Lead Wire or Connector Type |
| Highest Action Frequency | 5 Cycle/Sec |
More details for you know us more:
Q1: What is your payment term?
A1: 30% TT in advance, the balance payment 70% against copy of b/l.
Q2: Is availabe to get sample, and how can I get some samples?
A2: We are honored to offer samples to you when the prices are
confirmed. Samples are free, however, the freight cost should be
collected by customer. If sample quantity is more than our regular
one, we will extra collect sample cost.
Q3: Where is your factory located?
A3: Our factory is located in Ningbo. Nearby Ningbo port, the
second largest port in China, convenient transportation and low
cost, and close to Shanghai
Q4: Have you exported to other countries?
A4: Yes, we have about 10 years experience of exporting to abroad,
we have customer in America, USA, Europe, Mid East and so on. We
have experience to pack goods well to avoid any mistake on sea
shipment.
Q5: What’s your delivery time?
A5: Normally, we keep stocks, if to produce, normally around 2
weeks. If you are in urget to get, we will speed up to satisfy you
as much as we can.
Q6: How does your factory do regarding quality control?
A6: We control strictly in every step: choosing best material for
our products, such as HP59-1 for our brass fitting, Automatic CNC
manufacturing, and 100% test for air pressure and inspection for
product appearance.
The pictures about the solenoid valve:
Welcome your any question, we will response at once. We also can
produce as customized.
Welcome your drawing or sample.
