Digital Coating Painting Thickness Gauge Magnetic With Data Memory
Film Thickness Meter
Film Thickness Meter Introduction
The F probes measure the thickness of non-magnetic materials (e.g.
paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome
etc.) on magnetic materials (e.g. iron, nickle etc.) . often used
to measure the thickness of galvanizing layer, lacquer layer,
porcelain enamel layer, phosphide layer, copper tile, aluminium
tile, some alloy tile, paper etc.The N probes measure the thickness
of non-magnetic coatings on non-magnetic metals. It is used on
anodizing, varnish, paint, enamel, plastic coatings, powder, etc.
applied to aluminum, brass, non-magnetic stainless steel, etc.
Film Thickness Meter Features
* Can store the new data in 99 groups.
* Two measuring methods: magnetic induction (F) and eddy current
(N).
* Two measurement mode: Single and Continuous(Notice:Continuous
mode is convenient to measure the
coating thickness of curved objects and tiny objects.)
* Metric/imperial system selectable.
* Manual or automatic shut down.
* Auto memory of calibration value,and auto recognize the
substrate.
* Operation process have buzzing reminder,while no buzzing in
continuous mode.
* Use “USB data output” and “RS-232 data output” to connect with
PC.
* Provide “Bluetooth ™ data output” choice.
* Separate Type can provide several type probe, measure can be more
flexibility.
Film Thickness Meter Specifications
Operating Principle | Magnetic Induction / Eddy Current (F / NF) |
Measuring Range | 0~2000 um / 0~80 mil |
Resolution | 0.1 um / 1 um |
Min. Radius Workpiece | F Type: convex 1.5 mm / concave 25 mm NF Type: convex 3 mm /
concave 50 mm |
Min. Measuring Area | 6 mm |
Min. Sample Thickness | 0.3 mm |
Accuracy | ± 1~3%n or ± 2.5 um |
Auto Power Off | Auto |
Metric / Imperial | Convertible |
Battery Indicator | Low Battery Indicator |
Operating Conditions | Temp. 0~40 °C, Humidity: 10~90 %RH |
Power Supply | 4 x 1.5 V AAA (UM-4) Battery |
Dimensions | 140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch ) |
Weight | 215 g (Not Including Batteries) |
Standard Accessories:
1. Film Thickness Meter Main Unit
2. Probe (F Type & NF Type)
3. Calibration Base Set (F Type / NF Type) CTG-BS
4. Calibration Foils (1 set, 4 pieces)
5. Carrying Case
6. Operation Manual
7. Testing report
Optional accessories:
- USB, RS-232C data cable with software
- Bluetooth data out put with software
- 90 degrees angle probe
