PET Bottles Hot Filling Machine Juice Filling Packing System
The machine is mainly used for washing/filling/capping PET bottle
juice, tea drinks and all kinds of energy drink for hot filling.
Only need to change a few spare parts, that can suitable for
filling pure water and mineral water.
Applicable Material : various kinds of juice, tea, energy drink, coffee and so on (hot
filling).
Applicable Bottle : 0.25L-2L Plastic Bottles
1. Rinser
- Spring cramps are used in the bottle washing process. The empty
bottles can be turned over 180° Along the conveying rail. There are
two times of internal and external washing, the efficiency of
bottle washing is high.
- Rinsing machine adopts Sunswell original overturn and
double-opened bottle clip. Bottle clip lock the bottleneck, the
material of bottle clip is SUS304, which is hygienic and durable.
- Bottle clip equipped with efficient spray on nozzle. The
extrusive droplet with 15° Angle ensures to wash all side of the
bottle, and can save the water.
2. Filler
- The design of filling structure is reasonable and hygiene dead
angle, the run of equipment is stable, it can control the material
from the bottleneck, the control accuracy is within ± 2mm.
- The filling valve material is SUS304
- The filling system has liquid level automatic control.
- Filling valve lift is controlled by the valve elevator, after
filling valve contact the bottleneck, it start to fill.
- Bottle is conveying by the wheel in the filling part.
- The juice or other hot beverage can be backflow by return tank to
control filling temperature.
3. Capper
Screw capping machine is most precision part in the 3-1 machine, it
has a big influence to the goods stability and defective rate. Our
screw capping has following feature.
1) Sunswell import of advanced technology of screw capping, improve
the stability and reliability of the screw capping machine. The
magnetic torque is used for screw capping. The power of screw
capping can be adjusted without steps. The power of the screw
capping can also be fixed, and the caps will not be damaged, the
capping is reliable.
2) In the screw capping part. It installed photoelectrical control,
when it has no cap, or the cap is bad, the machine will stop
automatically
4. Equipment structure
L Base
L Rotary rinser
L Rotary filler
L Rotary capper
L Bottle infeed and outfeed system
L Control
Zhangjiagang Fresh Juice Filling & Packing System For PET Bottles
Factory
5. Main configuration
L Touch screen: THINGET
L PLC program controller: Mitsubishi
L Inverter: Mitsubishi
L Photoelectrical controller: Autonics
L Proximity switch: Autonics
L Other electrical components: Schneider
L Pneumatic component: Airtac
L Water pump: Nanfang
L Main motor: Siemens
L Bearing: Harbin
| Model | CGF 12125 | CGF 18186 | CGF 24248 | CGF 323210 | CGF 404012 | CGF 505012 | CGF 606015 | CGF 808020 |
| washing, filling and capping heads | 12-12-5 | 18-18-6 | 24-24-8 | 32-32-10 | 40-40-12 | 50-50-12 | 60-60-15 | 80-80- 20 |
Production capacity(600ml)
(B/H) | 2000- 4000 | 5000- 7000 | 8000- 12000 | 12000- 15000 | 16000- 20000 | 20000- 24000 | 25000- 30000 | 35000- 40000 |
| suitable bottle specification(mm) | φ=50-110=170 330-2250ml |
| Washing pressure(kg/cm 2 ) | 2-3 |
| Motor power(kw) | Main motor
2.2kw | Main motor
2.2kw | Main motor
3kw | Main motor
5.5kw | Main motor
7.5kw | Main motor
11kw | Main motor
15kw | Main motor
19kw |
| Overall dimensions (mm) | 2400×1650
×2500 | 2600×1920
×2550 | 3100×2300
×2800 | 3800×2800
×2900 | 4600×2800
×2900 | 5450×3300
×2900 | 6500×4500
×2900 | 7680× 6640× 2850 |
| Weight (kg) | 2500 | 3500 | 4500 | 6500 | 8500 | 9800 | 12800 |
