SC Connector 12 Cores Fiber Optic Patch Panel, Optical Distribution
Frame 12 Ports
Fiber optic patch panel are the auxiliary equipment for terminal
wiring in optical fiber transmission
communication network, which is suitable for indoor optical cable
splice directly and branch connection,
and protective the fiber.
Material properties
Fiber Optic Patch panel materials is corrosion resistance, stable physical and chemical properties;
all material must be compatible, and is compatible with optical cable
sheath and wiring pigtail sheath.
To prevent corrosion and other electrical damage, these materials
must be compatible with the other
equipment used in the patch panel
1. If the patch panel use engineering plastics, its combustion performance
shall be in accordance
with A GB/T5169.7 test, the test last for 30s.
2. optical fiber connector enhancement protector use materials and hot melt temperature filler shall
be not less than 120 °C, thermal softening temperature shall be not less than 90 °C, can be used in
a 25 ~+40°C temperature.
3. all materials should be non-toxic, non corrosive, on human health and other equipment element
side effects.
The appearance shall complete shape, no burr, no bubbles, no cracks
and voids, warping, impurity
defects. All the background color should be uniformly continuous.
Beautiful appearance and
convenient construction, low attenuation loss, reasonable structure, reinforced core is fixed in
the terminal box, the sheath has ground wire, suitable for fiber optic ribbon cable and indoor cable.
Unique design,19 inch rack or wall mount.
Features
- Applicable in the termination and 19'' standard structure,
- Metal sliding design
- rack mount in optical distribution frame ODF
- Suitable for FC,SC,ST,LC,E2000 adapters
- Cold rolled steel sheet, with electrostatic spraying
- Box size: 430*250*1U available,for cost save.
Specification
Type | Dimension (mm) | Max capacity (core) | Carton size (mm) | Qty/ carton (pc) | G.w (kg) |
GPSM-1U-SC12 | 430*300*1U | 12 | 485*420*350 | 5 | 29 |
GPSM-1U-FC24 | 24 | 485*420*350 | 5 | 29 |
GPSM-1U-2SC24 | 48 | 485*420*350 | 5 | 29 |
GPSM-2U-FC48 | 430*300*2U | 48 | 500*355*550 | 4 | 26.5 |
GPSM-4U | 130*300*4U | 192 | 500*350*540 | 1 | 18.9 |
Environmental requirements:
Not suitable outdoor use, if need to use, should take protective
measures.
Working temperature | -25 to +40 °C |
Storage temperature | -25 to +55 °C |
Relative humidity | ≤85% (30°C) |
Atmospheric pressure | 70 ~ 106kPa |
Service life | 20 years |
Mechanical properties
Tensile strength: should withstand axial tensile strength not less
than 500N between cable terminal
box and the cable, and not less than 5N between wiring pigtail and
terminal box.
Compression test: cable terminal box each should be able to
withstand the vertical static pressure
not less than 200N.
Twist test : cable terminal box should be able to withstand the
torsion angle.
Electrical properties
- Fiber optic cable box metal component and cable metal strengthening
core, cable metal
- components and the ground insulation resistance
- insulation resistance:
- should be no less than 2*104M ohm, test voltage:500V (DC).
- voltage strength:
- no breakdown, no arc phenomenon at 15Kv DC under 1min, no
breakdown, no arc
- phenomenon.
