15PPM Bilge Alarm for oil water separator
Meet IMO MEPC 107(49) and CCS certificate
Technical Data
Measure range:0-30ppm
Alarm Point:1-15 ppm adjustable
Accuracy: Better than 5mg/l
Power Supply:220VAC/110VAC ± 10%
Display:LCD display
Size (over all):360 mm W x 240 mm H x 105 mm D
Standard:IMO.Res.MEPC.107(49)
Specific
The bilge water alarm device has been designed specifically for use
in continuous monitoring of
oil-in-bilge water, 15 ppm alarm and control of discharge,
detection, memory and enquiry of alarm
status. It is applicable to detect boiler condensate water. And it
applies to oil and chemical industries
as well.
The bilge water alarm device use the technology of near infrared
measurement, which can display the
detected result in real time. The unit is supplied with 2
works-adjusted alarms. The set point (15ppm
factory set) could be adjusted at any moment through the panel. If
an alarm set point is exceed, the
alarms are visible at the front panel and the appropriate relays
are switched, that can be achieved the
movement control of overrun closedown or the treatment of overrun
recycle, and the memory and
enquiry of alarm record. Furthermore, a 4 - 20 mA (equal to 0 –
15ppm) effective signal output is available
for driving a recorder or external meter.
