Decorative Plastic Sheet Extrusion Line Single Screw with Bright
surface
QUICK DETAIL :
1. Worm wheel to adjust the pressing roller
2. Bright surface of the pressing rollers
3. Equal temperature of the roller surface
4. Clean, bright, equal thickness sheet produced,
5. Select different plastic to produce the compound sheet with
different colors according to different products.
Description:
Plastic pellets are fed into the barrel of the extruder and
conveyed by the screw, the heaters which are outside of the barrel
of the extruder as well as the friction from the rotation of the
screw melt the plastic pellets into a sheet mold and then placed on
a three-roll calender, the produced sheet goes through the bottom
and middle roll,wrapping around back of the middle roll and then
back to the top roll or other methods as shown in sheet calender
picture, these rolls are helpful to take the heat out of the sheet,
after the sheet comes off the roll,it moves down the conveyor to
the end of sheet line where the edge trimmer cuts the sheet to
width as well as a sheet shear cutter to length.
Sheet Machinery Parameter of PP/PE Plastic Sheet Extrusion Machine
Layer Structure | Mono Layer Extrusion Line | 3-layer Extrusion Line | 5-layer Extrusion Line |
Extruder Model | SJ90,SJ100,SJ120,SJ150,SJ200 | SJ120/33,SJ65/33 | SJ120/33,SJ45/33,SJ65/33 |
Sheet Width | 600-1300MM | 600-1300MM | 600-1300MM |
Sheet Thickness | 0.25-2.0 | 0.3-2.0 | 0.3-2.0 |
Max.Capacity | 150-500 | 250-400 | 250-450 |
FEATURES:
1. Width: 320-3000mm
2. Thickness: 0.2--2mm
3. Mono-layer and multi-layer sheet extrusion system for up to 5
layers
4. Processing capabilities: PE, PP, PS and other thermoplastic
materials
Applications:
1. Design with high technology, ensure high precision and high
quality.
2. Extruder screw with latest technology, ensure not only high
extrusion output and 100% plasticization but also high gloss for
finished cable
3. Electric appliances all imported, ensure high running stability
and service long life
4. Japan RKC temperature control, improve high precision
5. Gearbox of chromed steel alloy with high-cycle rigidifying and
carefully grinding treatment to against abrasion and noise
6. All electric elements are imported, ensure high running
stability and long life
Specifications:
Model | Unit | TYJB-75 | TYJB-90 | TYJB-110 |
Material applied | PP,PS,PE |
Width of sheet | mm | ≤600 | ≤750 | ≤1100 |
Thickness of sheet | mm | 0.2-1.6 | 0.2-2.0 | 0.2-2.0 |
Extrusion capacity | kg/h | 60-100 | 100-150 | 150-200 |
Diameter of screw | mm | 75 | 90 | 105 |
Installed capacity | kw | 75 | 90 | 120 |
Competitive Advantage:
1. Certification:CE,ISO,CNAS
2. Good formed effect
3. Available material:PP,HIPS,GPPS,PE
4. plastic sheet extruder
