Description chinacoal05
ASICMiner Prisma is based on a proprietary X48 design for BE200. It
greatly reduces power
consumption of the device per GH/s compared to the old X24 tube
design.
It has the same cooling structure and a similar form factor as the
ASICMiner Tube,
while being more efficient. Also cgminer support on Raspberry PI
has been added.
Spec
Hashrate: 350-370GH/s per hashing board +-5%, 1400-1480GH/s +-5%
per unit
Power consumption: ~0.67 W/G board-wise.
On-wall power consumption relies on PSU
efficiency. (typically 1050-1100 W per full device, 0.75-0.78 W/G)
Size: 35cmx12cmx12cm per full device.
Powering: One 6pin PCI-E plugs per hashing board. 4 X PCIE Required
Per Device [PSU Not Included]
The hashing units are driven by ethernet controllers [Not
Included].
Can also be used by cgminer on Raspberry PI.
Each ethernet controller or Raspberry PI can run up to 32 units
when configured.
Units will be tested before shipment.
