Advantages chinacoal05
1. Easy to operate.
2. Heating time can be adjusted.
3. Seal various plastic films.
Product Introduction
The PFS series sealer is easy to be operated and suitable to seal
various kinds of plastic films, with the heating time adjustable.
It starts working just by turning on the power supply. An impulse
sealer is used to close the open edge of a bag before heat
shrinking the bag. This simple process has just a few steps:(1)
place item in bag,(2) use sealer to make a new seam so contents are
completely encased, (3) use heat gun to shrink bag.
It's impulse type. Machine only uses power and gets hot when seal
arm is depressed to seal a bag. Cools immediately after sealing.
Brand new in retail box
Simple to use- Impulse Sealing System - Seals Uniformly - Every
Time
Solid state timer adjustable from .3 to 1.2 seconds for sealing
bags of various thickness. (Max 6 Mil for PE, max 4 Mil for PP).
Die-Cast construction No Warm-up time necessary Timer for Sealing
Control Protection Fuse
8 inch (20 cm) sealing length 0.12 inch wide sealing
Voltage: 220V-240V / 50HzPower: 300W
Power: 300WPlug type: European 2 prongs plug.
This 8" Impulse heat sealer provides a sturdy, airtight, watertight
seal for polyethylene (PE) and polypropylene (PP) bags and other
materials (shrink film, saran, etc.) NOT recommended for use on
cellophane, foil, metal, mylar, etc.
Package Included: 1 Plastic Bag Sealer
Extra Spare Parts Included 1 Sealing Element and 1 Teflon Sheet
Technical Parameter
Model |
PFS-100
|
PFS-200
|
PFS-300
|
PFS-400
|
voltage
|
AC220V 50HZ 110V 60HZ
|
Impulse power
|
180W
|
330W
|
430W
|
600W
|
Sealing length
|
100MM
|
200MM
|
300MM
|
400MM
|
Max. seal thickness
|
0.2MM
|
0.3MM
|
Heat time
|
0.2-1.3 SEC
|
Machine size
|
220*72*140MM
|
320*80*150MM
|
450*85*180MM
|
550*85*180MM
|
Machine weight
|
1.8KG
|
2.8KG
|
4.5KG
|
5.2KG
|
