K-240 is a sleek appearance of the desktop cradle, applicable to
all persons 12RS inch and 18RS inch gooseneck microphone. Able to
provide RFI capability, the audio signal from the gooseneck
microphone without loss transferred to PA systems.
Property
• Black paint is suitable for almost all occasions
• Can the included XLR cable 12 feet from the back through the base
or bottom
• Fixing holes for fixed installation
• Compatible with all Centraverse gooseneck microphone
Installation:
1. Install two screws in the mounting surface, precise separation
distance of 14 mm (9/16 inch). Shall be fixed between the screw
head and the surface leaving a gap 5 mm (3/16 inch). Only use a
flat head screw.
2. Place the microphone into the screw, and then slide back into
the locked position. Can pass through the cable from the back or
bottom of the base.
3. Place the neck gooseneck microphone connected in the end seat
(microphone sold separately).
4. The integrated XLR cable to connect to the mixer or PA system.
Note: The microphone is equipped with 48V phantom power required to
work.
See RS gooseneck microphone User Guide to learn more about the use
of the product.
Specifications:
Polarity
Positive pressure shock membrane can produce a positive voltage
relative to pin 3 on pin 2
Environmental conditions
Operating temperature -18 to 57 ° C (0 135 ° F)
