Impregnated Casing Concrete Core Drill Bit / BW NW HW Diamond
Casing Shoes Bits
TC Casing Concrete Core Drill Bit / BW NW HW Diamond Casing Shoes
Bits
TC Casing Concrete Core Drill Bits , BW NW HW Diamond Casing Shoes
Bits for exploration core drilling soft rock formation
Detailed Product Description
TC Casing Concrete Core Drill Bits , BW NW HW Diamond Casing Shoes
Bits
Discription:
The casing shoe bits (rod shoes bits) are designed to drill in
casings or rods in difficult over burden material to position the
rods or casing in the drilling hole. The interior is smooth and
sufficiently large enough to allow free passage of coring equipment
such as bits, reaming shells core barrels and drill rods. They are
manufactured to withstand difficult drilling conditions: for
example, unconsolidated overburdened or broken abrasive materials.
Impregnated Casing Shoes Bits
Impregnated casing shoe bits are recommended for very hard and
fractured formations. They can be manufactured in all series and
varying impregnation heights to suit your individual requirements.
Specifications:
AW, BW, NW, HW, PW Casing Shoe
1. High penetration rate
2. High core recovery ratio
3. Long service life
4. Lower cost
ROSCHEN specialisted in producing varies kinds of diamond core bits
in different international standard size for soft, medieum to hard
rock formations. Including impregnated diamond core bit,
surface-set diamond bit, reaming shells, impregnated diamond casing
bit, casing shoe bit, TC core bit, TC casing bit, diamond reaming
shell, corelifter, corelifter case, diamond sub-adapters, hoist
plugs, tap, etc.
With ISO certificate & quality control.
Size Available:
Wireline Series: A, B, N, H, P
W Series: RW, EW, AW, BW, NW, HW, PW, SW, UW, ZW, HWT, PWT, BWS,
NWS, HT, PT, SZ
Metric Series: 46, 56, 66, 76, 86, 101, 116, 131, 146
X Series: RX, EX, AX, BX, NX, HX, PX, SX, UX, ZX
All international standard Sizes
Notice :
To select the right bit for the job, assess the speed and power of
your drill for the size and depths of the holes to be drilled and
assess ground conditions such as rock type/formation and down-hole
conditions.
Size:
ROSCHEN bits are available in all standard drilling sizes. Also,
non-standard sized bits can be produced according to requirements
from clients.
Crown Height:
ROSCHEN offers crown impreg depths of 9mm, 12mm, and 16mm. The
taller crown heights provide improved bit stability and reduced
vibrations, enhancing bit life and performance.
Waterways:
Various waterways are available for diamond impregnated bits.
Differing waterways allow for better flushing in various ground
conditions and drilling systems.
Matrix:
ROSCHEN impregnated bits matrices can be selected by our engineer
according to ground conditions at client's work site.
Threads:
standard Q threads as well as thread types required by clients are
available.
| Wireline diamond core bits specifications |
| SIZE | CORE Ø | HOLE Ø |
| AQTK | 35.5 mm (1-3/8 in) | 48 mm (1-7/8 in) |
| BQ | 36.4 mm (1-7/16 in) | 60 mm (2-3/8 in) |
| BQTK | 40.7 mm (1-5/8 in) | 60 mm (2-3/8 in) |
| NQ | 47.6 mm (1-7/8 in) | 75.7 mm (3 in) |
| NQTK (NQ2") | 50.6 mm (2 in) | 75.7 mm (3 in) |
| NQ3 | 45 mm (1-3/8 in) | 75.7 mm (3 in) |
| HQ | 63.5 mm (2-1/2 in) | 96 mm (3-3/8 in) |
| HQ3 | 61.1 mm (2-3/8 in) | 96 mm (3-3/8 in) |
| PQ3 | 85 mm (3-3/8 in) | 122.6 mm (4-7/8 in) |
| PQ3 | 83 mm (3-1/4 in) | 122.6 mm (4-7/8 in) |
| Wireline diamond core bits, metricl diamond impregnated drill bits
specifications |
| "Q" series: | AQ, BQ, NQ, HQ, PQ/AQTK, BQTK, BQ3, NQ2, NQ3, NQTT, HQ3, HQTT, PQ3,
PQTT |
| A-Gauge Core Bits: | AQ, AQ-RSG, AWG(AX), AWM, AWT, LTK48 |
| B-Gauge Core Bits: | BQ, BQ-RSG, BQ-2.400, BQ3, BWG(BX), BWM, BWT, LTK60, TBW |
| N-Gauge Core Bits: | NQ, NQ-RSG, NQ-3.032, NQ2, NQ2-RSG, NQ3/NQTT, NQ3-RSG, NQ3-3.032,
NMLC, NWG(NX), NWM, NWT, TNW, |
| H-Gauge Core Bits: | HQ, HQ-RSG, HQ-3.830, HQ-3.895, HQ3/HQTT, HQ3-RSG, HQ3-3.895, HMLC,
HWF-Long, HWF-Short, HWG(HX), HWT |
| P-Gauge Core Bits: | PQ, PQ3, PWF-Long, PWF-Short |
| S-Gauge Core Bits: | SWF-Long, SWF-Short |
| U-Gauge Core Bits: | UWF-Long, UWF-Short |
| Z-Gauge Core Bits: | ZWF-Long, ZWF-Short |
| T Series: | T36, T46, T56, T66, T76, T86, T101 |
| TT Series: | TT46, TT56, TT66, TT76, TT86, TT101 |
| T2 Series: | T2 46, T2 56, T2 66, T2 76, T2 86, T2 101 |
| TB Series Metric Core Bits: | TB36, TB46, TB56, TB66, TB76, TB86, TB101 |
| T6 Series Metric Core Bits: | T6-76, T6-86, T6-101, T6-116, T6-131, T6-146 |
| T6S Series Metric Core Bits: | T6S-76, T6S-86, T6S-101, T6S-116, T6S-131, T6S-146 |
| B Series(IS03552-1)Metric Core Bits: | B36, B46, B56, B66, B76, B86, B101, B116, B131, B146 |
| All other standard: | CDDA, DCDMA, Crealius, and ISO sizes. |
Keywords:
diamond impregnated drill bits
PDC, Impregnated, Natural Diamond Drill Bits
Hybrid Drill Bits
FuseTek Hybrid Drill Bits
National Oilwell Varco
Impregnated diamond drill bit
Impregnated Diamond Bit, Impregnated Diamond Bit Suppliers and
Manufacturers
wholesale Impregnated Diamond Bit, Impregnated Diamond Bit
suppliers, Impregnated Diamond Bit factory
Impregnated Diamond Bit, Wholesale Various High Quality Impregnated
Diamond Bit Products from Global Impregnated Diamond Bit Suppliers
and Impregnated Diamond Bit Factory,Importer,Exporter
impregnated diamond bit
Impregnated Drill Bit, Impregnated Drill Bit Suppliers and
Manufacturers
wholesale Impregnated Drill Bit, Impregnated Drill Bit suppliers,
Impregnated Drill Bit factory
Impregnated Drill Bit, Wholesale Various High Quality Impregnated
Drill Bit Products from Global Impregnated Drill Bit Suppliers and
Impregnated Drill Bit Factory,Importer,Exporter
Diamond Core Drill Bits
Impregnated Drill Bits
Diamond Impregnated Drill Bits
Diamond Impregnated Drill Bits
Impregnated Diamond Drill Bits
Diamond-Impregnated Drill Bits
Kinetic Diamond-Impregnated Drill Bits
Impregnated Drill Bit, Impregnated Drill Bit Suppliers
Diamond Core Drill home depot
Diamond Core Drill Bits for concrete
Diamond Core Drill Bits for stone
Diamond Core Drill Bits for glass
Diamond Core Drill Bits for granite
Diamond Core Drill Bits manufacturers
wet diamond core bits
diamond core drill
sds diamond core drill bits
diamond core bits for concrete
core drills for concrete
diamond core drill bits for glass
milwaukee diamond core drill bits
concrete coring bits
Impregnated Core Bits
4 core drill bit
diamond core drill bit
asphalt core drill bit
Diamond Impregnated Bits
impregnated core drill bits
Impregnated Bit, Diamond Core Drilling
Impregnated Tube Diamond Core Bits, Impregnated Tube
Diamond Impregnated Bits
Impregnated Drill Core Bit, Impregnated Drill Core Bit
Impregnated Bit Ordering Guidelines
Impregnated Bit Selection Guide
Impregnated Bit Waterway Configurations
Impregnated Bit Running Parameters
Impregnated Bit Wear Pattern Guide
For more information, please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.com ; http://www.roschen.net
http://www.roschen.cn ; http://www.roschendrill.com
http://www.roschenmining.com ; http://www.roschendrilling.com
