Environmental Custom Sand and Dust Test Chamber with touch screen
PLC
Description:
Sand And Dust Test Chamber is designed according to
GB4706,GB2423,GB7000.1,IEC60529,ect standards and meet the IPX5 and
IPX6 dust test requirements. It is maily used for testing control
cabinet, household appliances, low voltage electric appliance,
automobile, lamps and lanterns, motorcycle parts,ect outer shells.
Test chamber pressure can be constant and changed, suitable for
indoor low concentration dust pollution test, assessment sample in
this environment of sealing and corrosion degree.
Specifications:
Test chamber dimension | All size Customized |
Outer dimension | according to inner structure |
Metal screen wire diameter | 50um |
Screen line space | 75um |
Environment temperature and humidity | 15~45°C, 45~75%RH |
Dust(talcum powder) concentration | 2~4kg/m3 |
Test time | Dust test time set freely, 0~999.9hr |
Test dust | Dry talcum powder or portland cement |
Test standards | GB4706,GB2423,GB7000.1,IEC60529 |
Power | 3ψ 4W+G 380VAC 50HZ |
Structure:
1. Sand And Dust Test Chamber Inner material: Stainless steel (SUS
#304)
2. Sand And Dust Test Chamber Outer material: Powder paiting steel
plate
3. Sand And Dust Test Chamber Use imported touch screen
programmable controller, can control dust blowing motor, dust
vibration and test time.
4. With sealing good chamber door, has lock device and glass
observation window.There is lamp and dust brush to ensure easy
observation of inner chamber.
5. With strong dust blowing device and vibrator to ensure
iniformity of each blowing.
6. Circulating air suuplying device: Frequency converter and high
pressure motor to ensure the air volume more precision.
7. Large diameter strong stainless steel air hose, covered with
heating device, can heat anddry the test chamber dust.
8. Anti-explosion handle, easy operation, strurdy and durable.
9. Imported high-precision electronic temperature humidity sensor
and air speed sensor.
10. Test sample differential pressure test device, can set pumping
rate freely according to sample inquiry.
11. There is a ψ50mm test hole on the left chamber and equiped with
port lid and silica gel chock plug. Through this hole can conenct
to outer test device.
12. There are casters with brake equipments and fixing foot pad to
make the machine easy operation and level adjustment.
13. With voltage current indicator, equipped with corresponding
sample DC12V power, DC24V / 20 a, interval, continuous power supply
adjustable. Dust concentration wind speed regulating function. May
control test total time, blow the dust of time interval and blowing
dust cycle and sample with the power source of the intermittent
time.
14. Vacuum system: Equipped with pressure meter, air filtration,
dust dehumidification system, regulating triple pieces, connecting
pipe (Vacuum pump should be prepare by customer)
