LED Bulb Replacement For Swimming Pool Lights IP68 With PC Cover
PAR56
Description:
1. Voltage: 12V
2. BEAM ANGLE : 15 / 30 / 45 / 60 / 120°
3. APPLICATION: SWIMMING POOL LAMP
4. AVERAGE LIFE TIME: 1500HOURS
5. LUMEN : UPTO 6000 LUMEN STRONG BEAM .
6. Color: White, Green, Blue, RGB color changing
7. Inner: Filament
Features:
1. Sole & Patented design,good perfomace and beautiful outlook
2. Size: 178(diameter) * 114(height) mm
3. plastic cup which ensure lamp cup/body unbreakable & good heat
difussion, and make sure of less lumens decline.
4. Transparent PC cover & EPDM rubber rigng-sealed, anti-corrosion,
shock-proof, unbreakable, safe transportation
5. IP68 with lamp housing
6. Constant-current driver to make sure LED light working stably,
avoid any flashing an noisy
7. Voltage: 12V AC/DC Frequency: 50/60HZ,
8. 252pcs, 350pcs, 558pcs
9. Projection distance: 6 ~ 15 meters
10. Color: White(pure white, warm white or cool white), Green,
Blue, Color changing
11. Color temperature(white): Pure white 6000-7000K / Warm white
3000-3500K
12. Beam angle: 15 / 30 / 45 / 60 / 120°
13. Life: 50000 hours
14. Overcurrent protection
Applications: Swimming pool,park,water fall, fountain spring,garden, rockwork,
yard, etc.
Advantages:
1, Our led swimming pool light has certificates: CE, IP68
waterproof rate for swimming pool.
2, No mercury and lead pollution, no UV and IR Radiation.
3, Low heat, low degradation, 3%~5%(3000hours), life
span:50000Hours
4, Energy Saving, Environment Friendly.
5, Easy installation, maintenance free of our LED swimming pool
light
6, Replace PAR56 300W traditional halogen light.
Instructions of remote control
1) Continue pressing the button “A” to make the 3 group led change
in seven stages:Red→green→blue→red+green→red+blue→green+blue→RGB
2) Continu pressing the button “B” to make the 3 group led change
in 3 modes:
1.RGB gradient change
2.Disco mode
3.Blinking change
3) Pressing button “C” to adjust the speed of “A” and “B”
4) Pressing button “D” to switch on/off the led light
5) It will reset in 5 seconds after power off
6) The remote control can operate many led lights synchronously
Installation procedure
1.Screw the bracket into the wall
2.Mount the clip of the bracket into the hole of the light
3.Screw the detailed illustrations in the below pictures
| PAR56P-LED252C | 12V/252 18W RGB led light, PC cover |
| PAR56P-LED252W | 12V/252 18W single color led light, PC cover |
| PAR56P-LED350C | 12V/350 25W RGB led light, PC cover |
| PAR56P-LED350W | 12V/350 25W single color led light, PC cover |
| PAR56P-LED558C | 12V/558 40W RGB led light, PC cover |
| PAR56P-LED558W | 12V/558 40W single color led light, PC cover |
