Vehicle Loop Detector Parking Barrier Gate with high speed , CE ISO
SGS Approval
Quick Detail:
Name: vehicle loop detector
- Easy installation
- Compatible with parking system
- Single loop and double loop
- Two relay out
The loop detectors must only be placed in dry rooms or control
cabinets that are protected against
all types of moisture and wetness. A distance of at least 10 mm
from other devices must be maintained
on each side. The ambient temperature must not exceed 65° C. The
installation of the induction
loop is described in other operating instructions.
Applications:
The WSTV-410 vehicle loop detector is a double channel inductive
loop detectors. The principle is based on a change in the
inductance within the loop which is caused by the metallic
components of passing vehicles. The changes are picked up and
evaluated by a microprocessor. Ease of use thanks to automatic
calibration when the operating voltage is applied.
Specifications
Supply voltage: 230V AC , 115V AC, 24V DC/AC, 12V DC/AC
( See the label on the detector)
Voltage tolerance AC: +10% / -15%
Voltage tolerance DC: ±15%
Power Consumption: 4.5VA
Output relays: 240V/5A
Operating temperature: -20°C to +65°C
Storage temperature: -40°C to +85°C
Frequency range: 20 kHz to 170 kHz
Reaction time: 100ms
Signal holding time: Unlimited
Sensitivity: Adjustable in 3 increments
Loop inductance: Total loop plus connection wiring: 50μH to 1000μH.
Ideal is 100μH to 300μH
Loop connection wiring: Maximum length 20 meters, twisted at least
20 times per meter
Size of Housing: 78x40x108 mm (L x W x H)
