AC 220V / 110V , 50 / 60HZ Automatic Barrier Gate With Manual
Release
Quick Detail:
Name: Automatic barrier gate
Voltage:AC220V, AC110V
Speed:1s,1.8s.3s 6 seconds
Feature:Straight boom
Certificate:CE, ISO, SGS
Net Weight:48KG
Rated Power:80W
Model Selection and Differences
Model | Boom Shape | Max Boom Length | Speed |
WST1161 | Straight boom | 6m | 6 seconds |
WST1162 | Straight boom | 4.5m | 3 seconds |
WST11621 | 90 degree, Articulated boom | 5m | 6 seconds |
WST11622 | 90 degree, Articulated boom | 3m | 3 seconds |
WST11661 | 180 degree, Articulated boom | 5m | 6 seconds |
WST11662 | 180 degree, Articulated boom | 3m | 3 seconds |
Main Features
1. Suitable for heavy duty use (100% duty cycle)
2. Fast opening speed
3. For barriers up to 6m beam length
4. Intelligent Plug&Play-control board for optimal operating
comfort
5. Automatic Reversal System ARS
6. Adjustable soft stop
7. Self-learning end positions (without limit switches)
Specifications
Model | WST1161 |
Working Temperature | -40℃～+75℃ |
Voltage | 220V±10%, 110V±10%, 50/60HZ |
Rated power | 80W |
Relative humidity | ≤90% |
Remote control distance | ≥30m |
Net weight | 48kgs |
Speed | 1S,1.8S,3S, 6S |
Max boom length | 6 meters |
Motor Rotational speed | 1400rmp |
Protection Degree | IP44 |
With WONSUN, your job gets easier.
Because we don’t just create “good” products, that work pretty
well.Our thinking is beyond the short-term.We are conceiving,
designing and creating high-tech solutions that are as advanced and
effective as they are reliable and long-lasting.
Because we want to provide tools and services that truly are
innovative,that will improve your performance and enhance your
skills;and that will make your business easier, increasing its
profitability.
Because our focus is on Quality with a capital Q.We just won’t
settle for less.
Communication with customers
1) Q: Connected power and press open/close button but automatic
barrier gate no action?
A | Reason | Solution |
1 | Fuse blown | Check fuse and power in controller |
2 | Battery of remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click OPEN/CLOSE button on control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q:Connected power and press open/close button, automatic barrier
gate will move but even when it is at right position, the motor
still running and not stop?
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to correct position |
2 | Main controller failure | Change a new one |
3) Q: Motor running but automatic barrier gate arm no action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock clutch and manually rotate arm to horizontal or vertical
position then try again |
2 | Tension of balancing spring not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing, automatic barrier gate arm cannot reach
right position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at
180° horizontal position if master rod and slave one are in the same
straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal position |
