Computer Controlled Battery Servo Motor Crush Testing Machine
1. Quick details
Power | 380V or In accordance with the national specified |
Design Standard | UN38.3, IEC62133,SAE_J2464 ,UL2054, UL1642 ect. |
Effective squeeze space | W300*D300*H200mm(or custom with the battery size) |
Crush stroke | 200mm |
Drive | Hydraulic or servo motor |
Crush plate diameter | φ150*10(thick)mm |
Controller | Computer control with the specialized sofware |
Hydraulic ram diameter | 32mm |
2. Description
The batteries are to be tested in an ambient temperature of 20
±5℃.Each fully charged cell is to be crushed between two flat
surfaces. The force for the crushing is to be applied by a
hydraulic ram exerting a force of 13kN .The crush is performed in a
manner that will be cause the most adverse result. Once the maximum
pressure has been applied or an abrupt voltage drop of one third of
the original voltage has been applied, or 10% of deformation has
occurred compared to the initial dimension, the force is released
(whichever condition occurs first should be the indication that the
force should be released). A cylindrical or prismatic battery is to
be crushed with its longitudinal axis parallel to the flat surfaces
of the crushing apparatus. A prismatic battery is also to be
rotated 90 degree around its longitudinal axis so that both the
wide and narrow sides will be subjected to be crushing force. Each
sample battery is to be subjected to a crushing force in only one
direction. Separate samples to be uses for each test. A coin or
button battery is to crushed with the flat surface of the battery
parallel with the flat surfaces of the crushing apparatus.
3. Features
(1). The machine is designed in strict accordance with the
standard.
(2). Computer control, the test results & test curve displayed
clearly.
(3). With beautiful appearance, easy to operation.
(4). Easy to handle because of the universal wheel
4. Corresponding Standard
IEC62133-2012, UN38.3, UL1642, UL2054, YD1268.1, SN/T1414.3,
GB8897.4, JGB2374, QB/T2502, QC/T743, QC/T744
5. Specifications
Power transmission method | Hydraulic or Servo |
The pressure | 13kN |
Accuracy of the force display | 0.1N |
Resolution | 1/10000 |
Compression Space | W300*D300*H200mm(or custom with the battery size) |
Distance of Compression | 200mm |
Holding time | 1s~9999h( arbitrary set) |
CABLE PORT | Diameter 50mm on the left side of the chamber |
Interior material | SUS#304 |
Exterior material | A3 steel paint drying |
Power | 380V,50~60HZ, |
Demension (mainframe) | 66*53*168cm |
Demension (controller) | 55*35*100cm |
7.Company information
Dongguan Gaoxin Testing Equipment Co., Ltd is a high tech company specialized in producing kinds of testing
equipment which was established in 2007, located in manufacturing
centre of China-Dongguan City where is close to Guangzhou city and
Hong Kong.
Our advantages:
(1) Speciality in testing equipment
(2) Various products to choose from
(3) Accept customization
(4) Excellent after-sale service
