Vertical Automatic Sliding Door Air Shower Clean Room Pass Box In
Clean Environment
Quickly Detail:
Internal Size: 500x960x500mm
External size : 980x960x2250mm
HEPA filter efficiency: 99.999%@0.3um
SUS nozzle: 12pcs
Blower way: Three side blowing
Air speed :>25m/s
Power: 380V/50HZ
The door open type :automatic electric slide type.
Princeples:
They are cominbed with pass through box and conveyor.
Pass through box's material is powder coated steel or stainless
steel, it is composed of two automatic sliding doors, HEPA
filters,, primary filters, Blower fans, Nozzles. When goods into
pass through box, it will be infrated by sensor to blowing to
remove the dust particle from goods, the two doors are interlocked,
it means that one door open, the other one must be closed,
therefore it is prevent the airflow convection between non clean
room and clean room, to keep the cleanliness of clean room.
The conveyor is L type, which is usually installed in the corner of
workshop, suitable for the narrow space.
The workers put the goods on the conveyor, it is moving to the
entrance door of pass box, it will open automatically, then moving
on into pass box, the 2 doors close and the conveyor stops, then
the pass box is blowing and reomving the dust particles from goods,
after blowing, the exit door will open automatically, the conveyor
will conintues to moving on , the exit doors will be closed, when
goods arrive the end point and no worker takes it away, the coveyor
will stop.
Technical Parameter:
MODEL | KEL-ASPB960 |
External size(mm) (WXDXH) | 980X960X2250 mm |
Internal size (mm) (WXDXH) | 50X960X500mm |
Interlocker | electronic interlocker |
Air way | 3 direction blowing |
Pre-filter (mm) | 560x275x17 |
HEPA Filter(mm) | 630x630x69 |
Air flow (m/s) | 1200m3/h |
Fan power | 380V/50HZ 750w (1set) |
Noise | <78dB |
HEPA Filter | 99.995% @0.3um |
UV lamp | 1 pcs |
Material
| 1:Entirety Sus201/304 (T=1.0/1.2mm) 2:External is steel with power coated, Internal is
SUS304(T=1.0/1.2mm) 3: External is steel with power coated. Internal is SUS201
(T=1.0/1.2mm) |
Customer’s design is available.
Factory test:
All of equipment is individually factory tested for safety and
performance in accordance with international Standards. Each unit
is shipped with a documentation outlining the tests undertaken and
the units individual results for each unit.
Factory test include:
-- functional test and visual inspection
-- electrical safety tests
-- air velocity testing
-- purification rank test (if need)
Warranty:
Our equipment is warranty for 1 year excluding consumable parts and
accessories.
All equipment is shipped with a comprehensive use’s manual complete
with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or
document request.
Consumable parts illustration:
1: Pre-filter: each one should be replacement in each 6 month, but
it can refresh no more three times.
2: HEPA filter: each one should be replacement in each half and one
years.
Why you choose K-LING Company ?
1. Superior Quality
Quality is our biggest concern. We are always striving
for quality improvement from the first beginning.
2. Competitive Price
Competitive price is one of our advantages compared to
others. We are always working hard to lower down the cost
while still improve or keep the quality.
3. Customer first service
Focus on customization, we provide the free design by our
designers. Reply with 24 hours if any questions and pack
in time for delivery.
4. All-in-one convenience
We are dedicated to give you all-in-one service. You just
tell us your demand, then we will take care of your demand,
design drawings, build the clean room and provide you best after
sale.
5. Product diversification
We are not only undertake clean room construction, clean
booth construction, etc., but also an agent to export
accessories from other factory. You could always choice the
suitable products in our company.
Punctual delivery time:
• Production / inspection report provide before shipment
• Shipping notice or insurance for you when your goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide one year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.
Payment Term:
T/T in advance, 30% before place the order, 70% when you see copy
BL
Or 30% T/T in advance before place the order, 70% LC at sight.
